Thank you for purchasing our product. Please read this User s Manual before using the product. Half-duplex audio supported 4 Channel Digital Video Multiplex Recorder 4 CH STAND-ALONE DVMR ALL ABOUT IMAGE RECOGNITION & PROCESSING DIGITAL VIDEO DIGITAL VIDEO RECORDER RECORDER User s Manual VER 1.
ALL ABOUT IMAGE RECOGNITION & PROCESSING SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This label may appear on the bottom of the unit due to space limitations.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING FCC INFORMATION 4. Arrangement RS-232C pin RS-232C A CLASS A computing device subject to certification by the Commission shall be identified pursuant to par.2.925 et Seq of the chapter. In addition, the label shall include the following statement: Pin No. Definition 1 NC 2 RxD 3 TxD 4 NC C o m m P o rt 1 5 GND 6 NC 7 NC 8 NC 9 NC This device complies with Part 15 of the FCC Rules.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING 6. Specification and Configuration 2. Configuration Table of Contents TCP/IP 1.About this document Camera #1~4 2 Sensor 2. Before reading this document 2 3. Unit Description 3 Remote Controller Alarm TCP /IP RS-232C 1) Front Panel 2) Rear Panel Printer 3 4 4. Installation 5 5.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING 6. Specification and configuration 1. SPECIFICATIONS Before installing stand alone DVMR, be sure to thoroughly review and follow the instructions in this MODEL NO Stand alone DVMR INPUT OUTPUT VIDEO I/F HORIZONTAL RESOLUTION S/N RATIO COLOR MONITORING METHOD 4 CH INPUT 1.0 VP-P, 75 OHM UNBALANCED (BNC TYPE) 3 OUTPUT VBS : 1.0VP~P.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING 3. Unit Description 5. Operation 6 MARK IMAGE SETUP (Internal backup) 1. Front Panel 1 POWER Indicates the start and end location of stored images. 6 14 13 MARK IMAGE SETUP Indicates the number of stored images.
ALL ABOUT IMAGE RECOGNITION & PROCESSING 01:00-03:00 ON 04:00-05:00 ON ALL ABOUT IMAGE RECOGNITION & PROCESSING 3.Unit Description 5. Operation Just record from 1 to 3 and from 4 to 5, and does not record for the rest hours. 01:00-03:00 OFF 04:00-05:00 OFF 2. Rear Panel Not record from 1 to 3 and from 4 to 5, and records for the rest hours. 01:00-03:00 ON 04:00-05:00 OFF 3 4 7 5 9 Just record from 1 to 3 (When both ON and OFF are set, priority is on ON.
ALL ABOUT IMAGE RECOGNITION & PROCESSING 4. Installation ALL ABOUT IMAGE RECOGNITION & PROCESSING 3 5. Operation SCHEDULE REC SETUP : ▶ Procedure SCHEDULE REC SETUP 1) Camera Connection SYSTEM SETUP DISPLAY SETUP CAMERA TITLE TIME/DATE SETUP ALARM/MOTION SETUP RECORD SETUP TCP/IP SETUP MISCELLANEOUS FACTORY DEFAULT Connect the camera to the CAMERA INPUT on the Rear Panel of the system.
ALL ABOUT IMAGE RECOGNITION & PROCESSING 5. Operation 8. MISCELLANEOUS SETUP 1 ALL ABOUT IMAGE RECOGNITION & PROCESSING 4. Installation BUZZER SETUP : Sets different kinds of BUZZER ON/OFF. BUZZER SETUP is available for each group as follows.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING 4. Installation 5. Operation 7. TCP/IP SETUP 5) Sensor Connection TCP/IP option of this DVMR system enables user to see live pictures and recorded pictures via internet line, far apart from DVMR unit. To see live pictures or recorded pictures of DVMR, users must assign IP address into DVMR together with Gateway and Subnet mask first, and then install Remote Viewer Program included in the package on client PC.
ALL ABOUT IMAGE RECOGNITION & PROCESSING 6. RECORD SETUP 5. Operation RECORD SETUP is one of the most important settings in DVMR system. In this menu, you can select simplex operation or semiduplex operation with a certain ratio between playback and recording.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING 5. Operation 5. Operation 1. Log-in 4 1 Enter the password default P/W : 1 LOGIN DVR SYSTEM PASSWORD 1,2,3,4 : MARK : ( 1) Press [MENU] button to enter the system menu after starting the system. 2) LOGIN DVR SYSTEM window appears as shown on the left. ) INPUT PASSWORD ERASE PASSWORD 2 Input or modify 3) Use numbers button [1], [2], [3], and [4] button to enter password.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING 5. Operation Move to alarm number in the list using [UP] and [DOWN] button, and press [MODE] button to mark “*”. 2) PAGE : Deletes current PAGE. 3) ALL : Deletes ALL. 4. GOTO : Starts playback from the marked item in the list. MOTION SETUP : In MOTION SETUP, you can set Sensitive of motion in 10 steps, detection window number, motion detection area and others in relation to motion recording in this menu.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING 5. Operation 5. Operation 5. ALARM/MOTION SETUP 4. PICTURE IN PICTURE (PIP) 1. In live view, you can select full screen of each channel by pressing numbers button from [1] to [4]. button to select a camera NOTICE : PIP is not available in quarterly split screen and playback mode. 2. Press [PIP] button to see small picture in picture in full screen. Indicates if “SEQ” button selection.
ALL ABOUT IMAGE RECOGNITION & PROCESSING 5. Operation ALL ABOUT IMAGE RECOGNITION & PROCESSING 5. Operation 6. SEQ 1.In live full screen, press [SEQ] button to make pictures from each channel rotate. 4. TIME/DATE SETUP 2. It does not operate in quarterly split screen. 3. During automatic rotation, press [SEQ] button again to stop automatic rotation. TIME/DATE SETUP SET TIME/DATE SET TIME/DATE TYPE SELECT 4.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING 5. Operation 5. Operation 3. Play 1. Playback setup 1 CAMERA ACTIVE SETUP : Time recording started. 1) Press [PLAY] button to begin playback.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING 5. Operation 5. Operation 3. CAMERA SETUP 4. Playback Speed Setup Playback speed 1) During playback , press [SPEED] button. CAMERA SETUP CAMERA COLOR SETUP COLOR SETUP TITLE SETUP ACTIVE CH SETUP SCREEN POSITION SETUP COLOR BAR TEST 2) Display screen as on the right will appear.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING 5. Operation 5. Operation 2. DISPLAY SETUP 4. System Setup This is about the contents displayed on the display screen. 1. Basic Operation 1) In SYSTEM SETUP menu, you can set variety of parameters required for operation of DVMR unit to its best performance for your application. 2) To enter into SYSTEM SETUP, first press [MENU] button, and you are requested to enter password (administrator password).
