User`s guide

Maxtor OneTouch IV 123
Step 3: Select Never Delete for copies you don’t want overwritten.
Step 4: Click Apply to save your selections and return to the SafetyDrill window.
Restoring Your System from a SafetyDrill Copy
If your system crashes, use your SafetyDrill System Boot CD to reboot your system. Then
you can use the SafetyDrill copies stored on your OneTouch drive to restore your entire PC
boot drive system.
To restore your system from a SafetyDrill copy,
Step 1: Install a new computer hard drive that is equal to or larger than your old drive.
If your new drive is larger than the original drive from which you made the
SafetyDrill copy, the extra portion of the new drive will not be partitioned during the
system restore from the SafetyDrill copy.
Step 2: Make sure your BIOS Boot Priority is set to Boot from CD. (Refer to your system
manual for detailed instructions.)
Step 3: Connect and turn on your OneTouch 4 drive BEFORE you reboot your
computer.
Step 4: Insert the SafetyDrill Recovery CD and wait for your system to reboot.
Figure 7: Manage SafetyDrill Copies