Specifications

Chapter #3 - Overview - Microsoft Windows O/S Version 2.0 62 000001628
MaxAttach NAS 6000 Administration Guide
Chapter #3 - Overview - Microsoft Windows O/S Version 2.0
Network Configuration
11/07/01 -- Revision 2.0.03A
NOTE
CHANGING THE ADMINISTRATOR PASSWORD: You cannot change the administrator password if
you are logged on as a domain user as it is outside the scope of the server appliance Web UI to
make changes to domain user accounts. Domain user accounts are stored on the domain controller,
not on the server appliance.
In this context, administrator relates to the user account that is a member of the local
administrators group and is used by a current user to log on. It does not refer to the default
administrator account, called administrator.
If you receive the error message “The password cannot be changed for this
domain account
” or “The account name cannot be changed for this
domain account
” when trying to change the administrator password or account name,
you are logged on as a domain user. You must be logged on as the server appliance
administrator to change the administrator password.
Administration Web Site Properties Page
This feature allows you to change the IP address and port that can be used to access the
administration Web site on the server appliance.
The default IP address to which the server appliance responds, or listens, is typically
changed when the server appliance is only managed on a certain subnet or a separate
management network.
The default listen ports for both encrypted and non-encrypted access can be modified as
needed to work with existing network software and configurations, for example, when no
traffic above a given port number is allowed.
Figure #29 Administration Web Server Properties