Specifications

Chapter #2 - Overview - MaxAttach NAS 6000 Hardware 32 000001628
MaxAttach NAS 6000 Administration Guide
Chapter #2 - Overview - MaxAttach NAS 6000 Hardware
Description of System Components
11/07/01 -- Revision 2.0.03A
Expansion Unit Back Panel
The Expansion Enclosure Back Panel is similar to the Base Unit with the following
exceptions:
n No CPU I/O Panel
n Three SCSI Connector Cards mounted in the card cage instead of a single RAID
Controller Card.
n No NICs
n The Power Supply Switches, Fans, and Blowers are the same.
Description of System Components
Major MaxAttach NAS 6000 Base Unit components:
n Power Supply Modules - hot swappable - two per Base Unit enclosure
n Hard Disk Drive Carrier Assemblies- hot swappable - 12 per Base Unit enclosure
n Standard network Ethernet port mounted on the CPU I/O Panel - one per Base Unit
enclosure
n High performance Gigabit Ethernet Network Interface Card (NIC) with copper
connections - one per Base Unit enclosure
n High performance Gigabit Ethernet NIC with fiber optic connections - one per Base
Unit enclosure
n Cooling Fans - hot swappable - two per Base Unit enclosure
n Cooling Blower - hot swappable - one per Base Unit enclosure
n SCSI RAID Controller Card -- connection to and management of disk arrays in the
Base Unit and any attached Expansion Units - one per Base Unit enclosure
n Environmental Monitoring Unit (EMU) Card -- monitoring system environmental
conditions such as temperature and power consumption - one per Base Unit enclosure