Specifications

Chapter #1 - Installation - Rack Mounting Your NAS 6000 11 000001628
MaxAttach NAS 6000 Administration Guide
Chapter #1 - Installation - Rack Mounting Your NAS 6000
1: User-Supplied Materials and Services
11/07/01 -- Revision 2.0.03A
Figure #6 NAS 6000 Network Interface Card Connector Options
AC Power Connections
1. Connect each AC power strip cord to the local AC power source.
n Recommend that each AC power strip be on a separate circuit.
2. Connect the NAS 6000 Expansion Unit enclosure to the user-supplied AC power
strips.
3. Install two AC power cords in each enclosure shelf.
4. Route the left side cords to the left side AC power strip.
5. Route the right side cords to the right side AC power strip.
6. Make sure all the power supply back panel ON/OFF rocker switches are in the OFF
or “O” position.
n There are two back panel switches on each enclosure shelf.