Specifications

Chapter #14 - Appendix - Disk Array Error Codes 288 000001628
MaxAttach NAS 6000 Administration Guide
Chapter #14 - Appendix - Disk Array Error Codes
Mylex Error Codes Table
11/07/01 -- Revision 2.0.03A
325 325 4 Information Power supply is not present.
326 326 1 Serious Temperature is over safe limit. Failure imminent.
327 327 3 Warning Temperature is above working limit.
328 328 4 Information Normal temperature has been restored.
329 329 4 Information Temperature sensor is not present.
330 330 3 Warning Enclosure access critical.
331 331 4 Information Enclosure access has been restored.
332 332 1 Serious Enclosure access is offline.
333 333 1 Serious Enclosure Soft Addressing Detected.
334 334 4 Information Enclosure services ready
384 384 4 Information Array management server software started successfully.
385 385 2 Error Write back error.
386 386 3 Warning Internal log structures getting full, PLEASE SHUTDOWN AND RESET THE
SYSTEM IN THE NEAR FUTURE.
388 388 0 Critical Controller is dead. System is disconnecting from this controller.
389 389 3 Warning Controller has been reset.
390 390 4 Information Controller is found.
391 391 0 Critical Controller is gone. System is disconnecting from this controller.
392 392 4 Information BBU Present.
393 393 3 Warning BBU Power Low.
394 394 4 Information BBU Power OK.
395 395 0 Critical Controller is gone. System is disconnecting from this controller.
396 396 4 Information Controller powered on
397 397 4 Information Controller is online.
398 398 0 Critical Controller is gone. System is disconnecting from this controller.
399 399 3 Warning Controller’s partner is gone, controller is in failover mode now.
400 400 4 Information BBU reconditioning is started.
Table #1 - Mylex Error Codes (Sheet 6 of 8)
Gam_ev
ent
Number
User_ev
ent
Number
Priority
Number
Severity
Level
Description