Specifications

Chapter #1 - Installation - Rack Mounting Your NAS 6000 8 000001628
MaxAttach NAS 6000 Administration Guide
Chapter #1 - Installation - Rack Mounting Your NAS 6000
1: User-Supplied Materials and Services
11/07/01 -- Revision 2.0.03A
9: DECISION POINT - Are there Expansion Units to Install?
n If your system has only a single Base Unit, skip ahead to Step #13 - Install
Network and AC Power Cables on page 9 below.
n If you system has a Base Unit and one or two Expansion Units, to continue
with the step immediately below.
10: EMU Cable Between Base Unit and First Expansion Unit
1. Install the Base Unit to First Expansion Unit EMU Cable
n Longer M/F serial cable.
n Start at the Base Unit EMU EXT2 port.
n Connect to EMU EXT1 port on the first Expansion Unit.
11 : DECISION POINT - One or Two Expansion Units
n If your system has only a single Base Unit, skip ahead to Step #13 - Install
Network and AC Power Cables on page 9 below.
n If you system has a Base Unit and two Expansion Units, to continue with the
step immediately below.
12: EMU Cable Between First and Second Expansion Unit
2. Install first Expansion Unit to second Expansion Unit EMU cable.
n Longer M/F serial cable.
n Start at first Expansion Unit EMU EXT2 port.
n Connect to EMU EXT1 port on the second Expansion Unit.
3. Your EMU cabling is complete.
NOTE
There is no terminator on the last EMU EXT2 port.