Specifications

Chapter #10 - O/S 2.0 - Maintenance 234 000001628
MaxAttach NAS 6000 Administration Guide
Chapter #10 - O/S 2.0 - Maintenance
Add or Remove Programs
11/07/01 -- Revision 2.0.03A
To shut down or restart the system
1. On the primary navigation bar, choose Maintenance.
2. Choose Shutdown.
3. Choose the task you want to perform.
4. Choose OK to confirm your decision.
5. If you have chosen to restart the server appliance, the Restarting page will display.
NOTE
The Restarting page checks periodically to determine whether the appliance is back online. If the
Restarting page detects that the appliance is online, it automatically returns to the default page.
To schedule a shutdown or restart
1. From the primary navigation bar, choose Maintenance.
2. Choose Shutdown.
3. Choose Scheduled Shutdown.
4. Choose the scheduled shutdown settings you want.
5. Choose OK.
NOTE
To cancel a currently-scheduled event, select the No scheduled shutdown or restart button.
Add or Remove Programs
The MaxAttach provides Web user interface access to the Windows 2000 Add/Remove
Programs applet in the Control Panel. You can use this applet to install or remove a
program or driver.