Specifications

Chapter #8 - O/S 2.0 - Folders and Shares 220 000001628

MaxAttach NAS 6000 Administration Guide

Chapter #8 - O/S 2.0 - Folders and Shares

NetWare Sharing Protocol

11/07/01 -- Revision 2.0.03A

To configure Web (HTTP) sharing properties

1. On the primary navigation bar, choose Shares.

2. Choose Sharing Protocols.

3. Select HTTP Protocol, and then choose Properties.

4. Choose to allow all IP address to access data shares on the server appliance, or select a

single IP address from the list.

5. Type the port number that can be used to access data shares on the appliance. The

default port number is 80.

• For more information about HTTP, see Web (HTTP).

For more information about HTTP share properties, see

Web (HTTP) Sharing.

• Adding a Share

• Removing a Share

• Modifying Share Properties

• Setting Windows (CIFS) Sharing Properties

• Setting NFS Sharing Properties

• Setting FTP Sharing Properties

• Setting Web Sharing Properties

• Setting NetWare Sharing Properties

• Setting AppleTalk Sharing Properties

NetWare Sharing Protocol

Setting NetWare Sharing Protocol

You can use the NetWare sharing protocol to share volumes on your server appliance

• Setting Windows (CIFS) Sharing Properties

• Setting NFS Sharing Properties