Specifications

Chapter #5 - O/S 2.0 - Network Configuration 156 000001628
MaxAttach NAS 6000 Administration Guide
Chapter #5 - O/S 2.0 - Network Configuration
Network Adapter Interfaces
11/07/01 -- Revision 2.0.03A
Network Adapter Interfaces
A network adapter provides the physical interface, or connector, and the hardware to let a
computer access a network. A network adapter is also called an adapter card, a network
interface card (NIC), or simply a card.
From the Interfaces page of the server appliance Web UI, you can perform one of the
following tasks:
n Change the name of the connection.
n Set or change the Internet Protocol (IP) addresses, gateway addresses, subnet masks, and
metrics.
n Set or change how the server appliance resolves DNS names.
n Set or change the configuration of the Windows Internet Naming Service (WINS)
clients.
n Configure AppleTalk, if enabled by your server appliance manufacturer.
Configuring Network Adapters
To configure a network adapter
1. Select the adapter you want from the Description column.
2. Select the task you want from the Tasks list.
3. On the Task page, use the tabs in the left pane to display the configuration of the
network adapter you chose.
• IP Address Configuration
• DNS Configuration
• WINS Configuration
• Initial NAS Server Appliance Configuration
• Initial Web Server Appliance Configuration
Related Topics