Specifications

Chapter #5 - O/S 2.0 - Network Configuration 145 000001628
MaxAttach NAS 6000 Administration Guide
Chapter #5 - O/S 2.0 - Network Configuration
Network Adapter Interface
11/07/01 -- Revision 2.0.03A
Network Adapter Interface
A network adapter provides the physical interface, or connector, and the hardware to let a
computer access a network. A network adapter is also called an adapter card, a network
interface card (NIC), or simply a card.
From the Interfaces page of the server appliance Web UI, you can perform one of the
following tasks:
n Change the name of the connection.
n Set or change the Internet Protocol (IP) addresses, gateway addresses, subnet masks, and
metrics.
n Set or change how the server appliance resolves DNS names.
n Set or change the configuration of the Windows Internet Naming Service (WINS)
clients.
n Configure AppleTalk, if enabled by your server appliance manufacturer.
Configuring a Network Adapter
To configure a network adapter
1. Select the adapter you want from the Description column.
2. Select the task you want from the Tas k s list.
3. On the Tas k page, use the tabs in the left pane to display the configuration of the
network adapter you chose.
• IP Address Configuration
• DNS Configuration
• WINS Configuration
• Initial NAS Server Appliance Configuration
• Initial Web Server Appliance Configuration
Related Topics