Specifications

Chapter #5 - O/S 2.0 - Network Configuration 144 000001628
MaxAttach NAS 6000 Administration Guide
Chapter #5 - O/S 2.0 - Network Configuration
IPX Settings
11/07/01 -- Revision 2.0.03A
statements are preloaded into the cache at system startup time and are not accessed later.
Remember that comment lines add to parsing time because each line is processed
individually.
To edit the LMHOSTS file
1. From the primary navigation bar, choose Network.
2. Choose Global Settings.
3. Select the NetBIOS LMHOSTS tab.
4. Select the Enable LMHOSTS lookup check box.
n By default, the box below the check box contains the current LMHOSTS file
configuration; however, if there are no entries to be seen, the box will be
empty.
5. Edit the LMHOSTS file by clicking in the box and changing the information.
6. Choose OK.
IPX Settings
Internetwork Packet Exchange (IPX) is the native NetWare protocol used on many earlier
Novell networks.
To be accessible from clients running NetWare, your server appliance must provide an IPX
address.
To configure the IPX address
1. From the primary navigation bar, choose Network.
2. Choose Global Settings.
3. Select the IPX Settings tab.
4. Enter a value in the Internal network number box, or leave the parameter's default
value at 00000000.
5. Choose OK.