Technical data

Product Description
2-2 Maxtor Fireball3
• 5400 RPM spin speed
• 12.0 ms seek time
• Zone density and ID-less recording
• Outstanding shock resistance at 300 Gs
• High durability with 100,000 cycles for reliable load/unload function
• Advanced multi-burst on-the-fly Error Correction Code (ECC)
• Extended data integrity with ECC protected data and fault tolerant servo
synchronization fields
• Supports EPA Energy Star Standards (Green PC Friendly) with ATA
powering savings commands
• Auto park and lock actuator mechanism
• Low power consumption
• SMART Capability
Note: Maxtor defines 1 Gigabyte (GB) as 10
9
or 1,000,000,000 bytes of data.
Total accessible capacity varies depending on operating environment.
2.3 Product Features
Functional/Interface
Maxtor hard drives contain all necessary mechanical and electronic parts to interpret
control signals and commands from an AT-compatible host computer. See Chapter 3
Product Specifications, for complete drive specifications.
Zone Density Recording
The disk capacity is increased with bit density management – common with Zone
Density Recording. Each disk surface is divided into 16 circumferential zones. All
tracks within a given zone contain a constant number of data sectors. The number
of data sectors per track varies in different zones; the outermost zone contains the
largest number of data sectors and the innermost contains the fewest.
Read/Write Multiple Mode
This mode is implemented per ANSI ATA/ATAPI-6 specification. Read/Write
Multiple allows the host to transfer a set number of sectors without an interrupt
request between them, reducing transfer process overhead and improving host
performance.
UltraDMA-Mode 5
Maxtor hard drives fully comply with the new ANSI Ultra DMA protocol, which
greatly improves overall AT interface performance by significantly improving burst
and sustained data throughput.
Multi-word DMA-Mode 2
Supports multi-word Direct Memory Access (DMA) mode transfers.