Specifications

DVR16M 18 GB
1) Alarm Recording
When the DVR16M receives an alarm input, it will start to record immediately. The recording speed & quality will be
as set in the alarm recording mode set-up.
The screen will be as displayed on the right.
A = alarm trigger
●
= recording
OW = HDD overwrite
032GB = if the OW location shows 32GB, it means that there is 32GB
recording capacity left on the HDD (1 HDD installed).
001GB
032GB = if the OW location shows these 2 readings, there is 1GB left on
the master HDD and 32MB on the slave HDD (2 HDD installed).
2) Programmed Recording
The DVR16M will follow the timer set-up to record and the recording
speed & quality will be as set in the TIMER menu.
T = Timer recording
● = recording
OW = HDD overwrite
032GB = if the OW location shows 32GB, it means that there is 32GB
recording capacity left on the HDD (1 HDD installed).
001GB
032GB = if the OW location shows these 2 readings, there is 1GB left on
the master HDD and 32MB on the slave HDD (2 HDD installed).
3) Manual Recording
You can press the REC button to start recording immediately. The
recording speed & quality will be as set in the RECORD menu.
M = Manual recording
●
= recording
OW = HDD over write
032GB = if the OW location shows 32GB, it means that there is 32GB
recording capacity left on the HDD (1 HDD installed).
001GB
032GB = if the OW location shows these 2 readings, there is 1GB left on
the master HDD and 32MB on the slave HDD (2 HDD installed).
c) Full Screen Channel Selection
Press one of the camera selection buttons to display that channel full screen.
d) Display Mode Selection
1. Press
, or several times to select the display mode.
2. Press the SELECT button + #or $ to select a position.
3. Press one of the channel selection buttons to select the desired camera.
4. Press the MENU button to exit.
2002 - JAN - 01 01:02:03
A ● OW
2002 - JAN - 01 01:02:03
T ● OW
2002 - JAN - 01 01:02:03
M ● 001GB