Specifications

DVR16M 17 GB
h) Event List
Press the MENU button on the front of the device, enter the
password and confirm it by pressing ENTER (cf. "4a: Open Main
Menu" on p. 7)
Press"or!until 'EVENT' is selected (cf. figure on the right).
Press ENTER to see the entire 'list of events'. A screen as
shown on the right will be displayed.
Press
#
or
$
to switch pages (8 events on 1 page) and
press"or!to select the desired event.
Press ENTER to play it.
Possible event codes:
M-HDD / S-HDD WARNING: Master/Slave HDD might be failed.
M-HDD / S-HDD LOSS: Master/Slave HDD does not exist/not found.
M-HDD / S-HDD ERROR: Error on Master/Slave HDD
HDD FULL: HDD is full
SYSTEM ERROR: System failure
----02 VLOSS: Video loss on channel 2
----03 ALARM: External I/O alarm on channel 3
POWER RESTORE: Power restore.
5. Operation
a) Power ON
Before turning power ON make sure any HDD has been locked, and the power LED is red. After pressing the
POWER button, the POWER LED will turn to orange and all the other LEDs will turn RED, except the LED for HDD.
The screen will display "HDD Detecting" ; power on period will be approx. 5 to 15 seconds. If HDD is set as master,
the screen will display " Master HDD Connected". If HDD is set as slave, the screen will display " Slave HDD
Connected". In order to shorten the power on running time, we suggest setting the HDD as master (by means of the
jumper on the HDD itself). When the DVR16M has powered on completely, the POWER LED will turn to green.
b) Recording
Your DVR16M offers a variety of flexible recording modes. You can set it up to record continuously or programmed,
or only to record events ; you can even set the recording speed and resolution. All these options are set through the
system menu. If there should be a power cut during recording, the device will automatically resume recording when
the power returns. The original recording set-up will be respected.
There are 3 recording modes for your device: alarm recording mode, programmed recording mode and manual
recording mode. All recording modes are described here:
(MENU)
SEARCH
TIMER
RECORD
CAMERA
SYSTEM
► EVENT
M-HDD WARNING 2002-JAN-01 03:00:00
M-HDD LOSS 2002-JAN-01 03:00:00
M-HDD ERROR 2002-JAN-01 03:00:00
S-HDD WARNING 2002-JAN-01 03:00:00
HDD FULL 2002-JAN-01 03:00:00
SYSTEM ERROR 2002-JAN-01 03:00:00
----02 VLOSS 2002-JAN-01 03:00:00
----03 ALARM 2002-JAN-02 03:00:00
◄: Page Up ►: Page Down ◄+►: CLEAR