Specifications

DVR16M 10 GB
12) SYSTEM RESET Set-Up
1. Press"or!to choose SYSTEM RESET and the ENTER button.
2. Press"or!to choose SYSTEM RESET: YES/NO.
Yes: to reset the system (Time & Password set-up will not be changed).
No: not to reset the system.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
13) REMOTE MODE Set-Up
1. Press"or!to choose REMOTE MODE and the ENTER button to open the menu.
2. Press"or!to set REMOTE MODE: RS-232 / RS-485.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
14) Remote Protocol Transmission BAUD RATE Set-Up
1. Press
"
or
!
to choose BAUD RATE and the ENTER button to open the menu.
2. Press"or!to set BAUD RATE: 115200 / 57600 / 19200 / 9600 / 4800 / 3600 / 2400 / 1200.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
15) REMOTE ID Set-Up (only when RS-232 is selected as remote protocol)
The RS232 protocol allows you to operate several DVR16M. The identification number can vary from 000 to 255.
1. Press"or!to choose REMOTE ID and the ENTER button to open the menu.
2. Press
"
or
!
to set REMOTE ID: 000~255.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
c) Search Menu
Press the MENU button on the front of the device, enter the
password and confirm it by pressing ENTER (cf. "4a: Open Main
Menu" on p.7)
Press"or!until 'SEARCH' is selected (cf. figure on the right).
Press ENTER to enter the search set-up menu.
A screen as shown on the right will be displayed.
From here on, follow the steps as indicated below.
► LAST RECORD
FULL LIST
ALARM LIST
TIME SEARCH
(MENU)
► SEARCH
TIMER
RECORD
CAMERA
SYSTEM
EVENT