Operating instructions

1. USB
Connect to a USB HDD or a USB Flash Drive.
2. EXTERNAL I/O
•Controlled remotely by an external device or control system suchas Video Web Server or PC.
•Alarm input, external I / O expansion.
3. VIDEO INPUT (1-4)
Connect to video source, such as camera.
4. CALL
Connect to CALL monitor. Show the Switch Display.
When alarm trigger happens, it will change to dwell modes of alarm(refer to p.18)
5. FAN
For ventilation, do not block the opening.
6. POWER
Please use the provided power cord.
7. MAIN
Connect to the main monitor.
REAR PANEL
5
Warning:
1. The adaptor is only for this machine. Do not use it for otherelectronic product or it might damage other products.
2. The adaptor is DC19V 2A. If it is damaged, users can find replacement adaptor locally with this specification.
EXTERNAL I/O
WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
USB
3
1
OUTIN
CALL
MAIN
4
2
DC 19V
1
2
3
4
5
7
USB PORT