Operating instructions

When malfunction occurs, it may not be serious and can be corrected easily. The table below describes some typical
problems and their solutions. Please check on them before contacting your DVR dealer.
TROUBLE SHOOTING
32
PROBLEM SOLUTION
l
Check power cord connections.
l
Confirm that there is power at the outlet.
l
Check if it is under Key Lock mode.
l
Press "
MENU"
& "
ENTER"
to exit Key Lock mode.
No recorded video
l
Check if the HDD is installed properly.
Timer Record enable does not
working
l
Check if the Record Enable is set to YES
l
Check camera video cable and connections.
l
Check monitor video cable and connections.
l
Confirm that the camera has power.
l
Check the setting of camera lens.
Under overwritting and duplex
modes, the playback motion is
interrupted
please press “STOP” button and then the “PLAY” button to play
again
No live video
No power
Not working when pressing any
button
To switch the system, you need to unplug the AC power, then
press “FF” or “REW”and plug inthe AC power cord
again.(Please refer to page.6)
NTSC & PAL System switch