Operating instructions

RECORD

MAIN OPTIONS

Press the “▲”“▼”“ ”“ ”buttons to move the cursor.

Press the “+”“-”buttons to change the digit.

Press the “MENU” button to confirm the changes/ to exit the menu.

▼

1. STOP RECORD(MANUAL RECORD)

The system will stop manual recording function during the recording period if the setting is “YES”. And then,

press the “ENTER” button to save the changed value.

Note: 1. The users have to stop recording function on this menu because the users cannot stop it by pressing any

front-panel buttons during the recording period.

2. In the Timer Recording mode, users have to either change the RECORD METHOD setting from TIMER to MANUAL

or change the timer setting to stop the timer recording function.

2. FRAME / SEC

Select the recording speed. The options are as following :

NTSC－30、15 、 5 PAL－25、12 、4

3. QUALITY

There are four image qualities : BEST, HIGH, NORMAL, BASIC.

4. HDD OVERWRITE

To set the HDD OVERWRITE. When the HDD is going to be full underO/W recording mode,

previous recorded files will be overwritten without furtherwarning notices if the HDD OVERWRITE is “ON”.

5. RECORD METHOD

There are two recording methods: MANUAL ( by pressing the “REC” button) and TIMER ( by setting the timer

recording).

***On the Timer Recording mode, users have to either change the RECORD METHOD setting from TIMER to

MANUAL or change the timer setting to stop the timer recording function.