User manual

34
3.11 Event
3.11.1 Enter “ Event “ list
Press ”MENU” to enter main menu. It is
necessary to enter the password to access the
main menu. Press “ Left ” or “ Right ” to
move digit, and to press” Up ” or “ Down ” to
select number. To press ”ENTER” button to
confirm password.
Ex.: Password: 0000 (Default: 0000)
PASSWORD : 0000
After keying in the correct password, and
confirming by pressing ”ENTER” button, The
following screen will be displayed.
SEARCH ------- Find recorded list
TIMER -------Scheduling Record
RECORD------- Record Mode Setup
CAMERA ------- Camera Channel Setup
SYSTEM ------- System Setup
EVENT -------- Event List
(MENU)
SEARCH
TIMER
RECORD
CAMERA
SYSTEM
? EVENT
Press “ENTER” to confirm Full List, and the
screen will be displayed as shown on the
right.
Press ” ” Up ” or “ Down ” to choose desired
recorded event (Only eight recorded events
will be shown on a single page), and press
“ Left ” or “ Right ” to change the pages.
Press “ENTER” to Play selected recorded
video
M–HDD WARNING 2002-JAN-01 03:00:00
M–HDD LOSS 2002-JAN-01 03:00:00
M–HDD ERROR 2002-JAN-01 03:00:00
S–HDD WARNING 2002-JAN-01 03:00:00
HDD FULL 2002-JAN-01 03:00:00
SYSTEM ERROR 2002-JAN-01 03:00:00
----02 VLOSS 2002-JAN-01 03:00:00
----03 ALARM 2002-JAN-01 03:00:00
?: PAGE UP ?: PAGE DOWN?+?: CLEAR
M-HDD WARNING: Master HDD might be failed.
M-HDD LOSS: Master HDD does not exist. Now user can use the other HDD.
M-HDD ERROR: Master HDD might be error
S-HDD WARNING: Slave HDD might be failed
S-HDD LOSS: Slave HDD does not exist. Now user can use the other HDD.
S-HDD ERROR: Slave HDD might be error
HDD FULL: HDD is full
SYSTEM ERROR: System might be failed
----02 VLOSS: Channel: 2 Video loss
----03 ALARM: Channel: 3 External I/O Alarm have triggered
POWER RESTORE : Power restore