User manual

22
3.5.14 Remote protocol Baud Rate setup
This setting allows the user to set the remote protocol baud rate.
3.5.14.1 Press ” Up ” or “ Down ” to choose Baud Rate setup.
3.5.14.2 Press ” ENTER ” to confirm
3.5.13.3 Press ” Up ” or “ Down ” to choose BAUD RATE setup
115200? 57600? 19200? 9600? 4800? 3600? 2400? 1200
3.5.14.4 Press ” MENU ” to exit and confirm the current operation.
3.5.14.5 Press ” MENU ” again to exit and close SYSTEM setup mode.
3.5.15 Remote protocol ID setup:
This setting allows the user to control different DMR’s by setting RS232 remote protocol.
ID number can be set from 000 to be 999.
3.5.15.1 Press ” Up ” or “ Down ” to choose ID setup.
3.5.14.2 Press ” ENTER ” to confirm ID setup
3.5.15.3 Press ” Up ” or “ Down ” to set numerical number, from 000 ~ 255
3.5.15.4 Press ” MENU ” to exit and confirm the current operation.
3.5.15.5 Press ” MENU ” again to exit and close SYSTEM setup mode.
3.6 SEARCH setup
Press ”MENU” to enter main menu. It is
necessary to enter the password to access the
main menu. Press “ Right ” or “ Left ” to move
digit, and to press Up ” or “ Down ” to select
number. Press ”ENTER” button to confirm
password.
Ex.: Password: 0000 (Default: 0000)
PASSWORD: 0000
After keying in the correct password, and
confirming by pressing ”ENTER” button, screen
will show the following options;
SEARCH ------- Find recorded list
TIMER -------- Scheduling Record
RECORD------- Record Mode Setup
CAMERA ------- Camera Channel Setup
SYSTEM ------- System Setup
EVENT -------- Event List
(MENU)
? SEARCH
TIMER
RECORD
CAMERA
SYSTEM
EVENT