User manual

20
3.5.8 TIME DISPLAY format setup
This setting allows the user to set the time format on the monitor.
3.5.8.1 Press ” Up” or “ Down ” to choose TIME DISPLAY setup.
3.5.8.2 Press ” ENTER ” to confirm TIME DISPLAY setup.
3.5.8.3 Press” Up ” or “ Down ” to choose TIME DISPLAY setup.
OFF, Y/M/D, M/D/Y, D/M/Y.
3.5.8.4 Press ” MENU ” to exit and confirm the current operation.
3.5.8.5 Press ” MENU ” again to exit and close SYSTEM setup mode.
3.5.9 TIME setup:
This setting allows the user to set time on the monitor.
3.5.9.1 Press ” Up ” or “ Down ” to choose date display
3.5.9.2 Press ” ENTER ” to confirm date display format.
3.5.9.3 Press ” Up ” or “ Down ” to choose the correct Date & Time, and press
“ Right ” or “ Left ” to move digit location.
3.5.9.4 Press ” MENU ” to exit and confirm the current operation.
3.5.9.5 Press ” MENU ” again to exit and close SYSTEM setup mode.
3.5.10 NEW PASSWORD : XXXX setup: (Default password : 0000)
This setting allows the user to set the new password.
3.5.10.1 Press ” Up ” or “ Down ” to choose NEW PASSWORD : XXXX setup.
3.5.10.2 Press ” ENTER ” to confirm NEW PASSWORD : XXXX setup.
3.5.10.3 Press ” Up ” or “ Down ” to choose number, and press“ Right ” or “ Left ” to
move digit location.
3.5.10.4 Press ” MENU ” to exit and confirm the current operation.
3.5.10.5 Press ” MENU ” again to exit and close SYSTEM setup mode.