User manual

13
3.3 Back panel connection
LOOP
EXTERNAL I/OPOWER
INPUT
WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IN
CALL
AUDIO
MONITOR
OUT
AUDIO
3.3.1 Power input
Please use the power provided adaptor.
3.3.2 External I/O
Controlled remotely by an external device or control system.
Alarm input / output.
3.3.3 75 / HI
When using Loop through function, please switch to HI.
3.3.4 VIDEO INPUT (1-16)
Connect to video source, such as camera.
3.3.5 Loop
Connect cable to Loop port to connect to another device.
3.3.6 AUDIO IN (1-4)
Connect to audio source, such as microphone.
* IPS should be set to 12A
3.3.7 AUDIO OUT (R/L)
Connect to monitor or speaker.
* IPS should be set to 12A
3.3.8 MONITOR
Connect to Main monitor
3.3.9 CALL
Connect to CALL monitor. Displays the sequenced output.