User manual

Front panel keypad

REC

SELECT

ENTER

ZOOM

SLOW

ALARM

HDD

Full

HDD

TIMER

PLAY

REC

Down

Left

Right

POWER

AVC 777

Digital Multiplex Recorder

Please follow the instructions below to operate this unit.

1. Install HDD

This unit comes with two removable hard disk drive trays. Before turning on this device, you

must install at least one hard disk drive (not including in standard package), and make it ready

to operate.

(If two HDDs are set up, one should be selected as “ Master” and the other should be selected

as “ Slave”. Otherwise, please set two HDDs to Cable Select.)

2. MENU : Press MENU to enter main menu operation mode, and press administrator password

(default:0000) to access main menu.

3. ENTER : Press ENTER for confirmation.

4. ZOOM : Press ZOOM button to enlarge the main monitor picture display.

5. : Picture in Picture. Press PIP button to enter PIP display screen.

6. SLOW : To press SLOW to slow down speed of play mode.

7. Select : Press the Select button to select the required camera (1~16) to display on full screen

mode.

8. : 4 channels display mode

9. : 7, 9, 10, 13 channels display mode

10. : 16 channels display mode

11. LED Light : Under following condition, the LED Light is ON.

(1) HDD : HDD is activated

(2) HDD Full: HDD is full