User`s manual

ARS-2016/2016EB Manual

2.4 Package

Upon receiving the package of ARS-2016, unpack it and check its contents.

n ARS-2016

n Support CD containing the driver of SCSI card and Mirror Smart Utility

n User’s manual

n Two small plastic sticks (to loosen the handle of the cabinet)

n AEC-67160 Ultra 160 SCSI adapter (optional)

Install ARS-2016EB according to the following steps.

Step 1: Prepare 2 hard drives of the same model at least, and set the jumper as

Cable Select or Single/Master mode.

Step 2: Take the 2 cabinets out of ARS-2016EB.

Step 3: Put a hard drive into each cabinet and connect it with the internal IDE cable

and power cord. Fasten the hard drive with screws if necessary.

Step 4: Replace the 2 cabinets to ARS-2016EB.

Step 5: Make sure that the auto-eject handles on the cabinets are closed.

Step 6: Set a proper and unique SCSI ID for ARS-2016EB (see page 25).

Step 7: Connect ARS-2016EB to the SCSI card with a SCSI cable. Be sure to add

a terminator to the end. Please see Chapter 4 for the connection.

Step 8: Connect ARS-2016EB with a power cord.

Step 9: Power on the PC and ARS-2016EB.

Step 10: After powering on, the system will detect a new SCSI hard drive of ARS-

2016EB. Before using it, please partition and format if necessary.

Upon receiving the package of ARS-2016EB, unpack it and check its contents.

n ARS-2016EB

n Support CD containing the driver of SCSI card and Mirror Smart Utility

n User’s manual

n External Ultra 160 SCSI round cable

n External Ultra 160/320 terminator (optional)