User`s manual

ARS-2016/2016EB Manual

boot from the OS on HDD B according to the above steps, or the OS is other than

Windows like Linux, Mac, etc., please try the third method.

3. Install a new IDE HDD (No. C newly purchased or fine) and a new OS (such

as Windows XP) into Mirror Smart

Step 1. Take two empty cabinets out of Mirror Smart.

Step 2. Put HDD C and HDD D into the cabinets, install them and replace to Mirror

Smart separately.

Step 3. Boot Mirror Smart and computer. Be sure that Mirror Smart’s hard drive

power LED is normal.

Step 4. After booting, if everything is right and the two hard drives are equal in

capacity, Mirror Smart will regard the hard drive on the upper cabinet as

source and that on the lower cabinet as destination, and begin to syn-

chronize.

Step 5. Enter BIOS to set the priorities of booting from CD-ROM and SCSI hard

drive to the first and second. Exit after saving the setting.

Step 6. Put the CD containing OS installation into CD-ROM and boot hence. Before

installing the OS, install the driver of SCSI card first if necessary.

Step 7. After installing the OS, please install the Mirror Smart Utility to monitor the

whole mirror.

Remark: In a set of Mirror Smart you are suggested to use two hard drives of the

same brand, model and capacity. If you replace a failed hard drive with a new one,

the new hard drive should be larger or equal to the original one.