User`s manual

ARS-2016/2016EB Manual

l Confirm if the quality of SCSI cable and that of terminator are good enough.

ARS-2016 or 2016EB communicates with SCSI card by 160MB/s of data

transfer rate, so if the SCSI cable or terminator is bad, the communication

will be unstable. Whenever there is a problem happening, try to lower the

transfer speed to verify the problem. However, choose a SCSI cable and a

terminator carefully.

l If the problem is the hard drive, try to get another one to set Mirror Smart

again.

5. Update the firmware of Mirror Smart and change the mirror size

Please refer to Appendix 2.