User`s manual

24
ARS-2016/2016EB Manual
The DIP switch setting gives a unique SCSI ID number to the Mirror Smart 160. The
figure shows the DIP switch of ARS-2016EB. It represents the DIP switch of ARS-
2016 without column 7 and 8.
Figure 4-11
1 2 3 4 5 6 7 8
ON
Please follow the instructions below to set DIP switch properly.
Give a unique SCSI ID number to each ARS-2016EB in a daisy chain according to
the following figure. Even if there is only one ARS-2016EB, you still need to give it
an ID number.
1 èON-SCSI ID 1
2 èON-SCSI ID 2
3 èON-SCSI ID 4
4 èON-SCSI ID 8
5 èReserve
6 èReserve
7 èReserve
8 èReserve
ON
OFF
Default: All OFF (ID=0)
è
è
1 2 3 4 5 6 7 8
ON
Figure 4-12
The above figure without the last two columns means the DIP switch of ARS-2016.
For the illustration of SCSI ID number in ARS-2016EB, please see Figure 4-13 on
page 25. For that in ARS-2016, please see Figure 4-14 on page 26.
4.4 DIP Switch Setting