User`s manual

ARS-2016/2016EB Manual

The control panel of ARS-2016/2016EB is described in details below.

l During normal operation, if the system detects a failed hard drive, the

failed drive LED A3 or B3 will glitter 10 seconds in alarm. Then, it will keep

lighting with handle ejecting. It indicates that the failed drive needs to be

replaced.

l After a new drive is installed and plugged, the system will check the new

drive. At this moment, LED A1, B1 and C1 will keep lighting. The currently

checked new drive LED A3 or B3 will glitter to indicate the hard drive.

l When the new drive is ready, LED A1, B1 and C1 will keep lighting, and the

new drive LED A3 or B3 will keep glittering. Yet, LED A2, B2 and C2 will

light to indicate that the system is rebuilding data to the new drive.

Figure 3-2

NOTICE: Replace the handle to “Lock” after installing all devices

otherwise the “Alarm” will be activated when power is on.

Press here to lock