Product manual

Installation
3-20 DiamondMax10 80/100/120/160/200/250/300GB AT
Table 3-3 Logical Addressing Format
Note: Capacity may be restricted to 8.4GB (or less) due to
system BIOS limitations. Check with your system man-
ufacturer to determine if your BIOS supports LBA Mode
for hard drives greater than 8.4GB. Default logical cyl-
inders is limited to 16,383 as per the ATA-4 specifica-
tions.To match the logical specifications of the drive to
the drive type of a particular BIOS, consult the system’s
drive-type table. This table specifies the number of cyl-
inders, heads, and sectors for a particular drive type.
4. Boot the system using the operating system installation disk—
for example, MS-DOS—then follow the installation instructions
in the operating system manual.
MODELS INTERFACE CYL HD SPT MAX LBA CAPACITY
6L080PO (RoHS)
ATA/133
8MB Buffer
16,383 16 63 160,086,528 80GB
6L100P0 (RoHS)
ATA/133
8MB Buffer
16,383 16 63 195,813,072 100GB
6L120P0 (RoHS)
ATA/133
8MB Buffer
16,383 16 63 240,121,728 120GB
6L160P0 (RoHS)
ATA/133
8MB Buffer
16,383 16 63 320,173,056 160GB
6L200P0 (RoHS)
ATA/133
8MB Buffer
16,383 16 63 398,297,088 200GB
6L250R0 (RoHS)
ATA/133
16MB Buffer
16,383 16 63 490,234,752 250GB
6L300R0 (RoHS)
ATA/133
16MB Buffer
16,383 16 63 586,114,704 300GB