User`s manual

DVR200 Series User’s Manual

3.6.8.6 Alarm Out

This item allows users to enable/ disable the alarm output on the selected

channel to activate the relay. The signal can be a light or siren to caution an

alarm event. Select <ON> to enable the alarm output, or <OFF> to disable.

3.7 POS Setup

The <POS> function provides a connection between the DVR and a

Point-of-Sale (POS) device, such as a cash register. With this function, the

financial transaction data can be linked to specific camera images and

recorded to the DVR. To enable this function, enter OSD setup menu with

proper account, and select <POS>. Press Enter and the following OSD setup

menu will show up.

POS

POS Function

POS Overlay

Exception POS Setup

Input Setup

Live & PB

ENTER

3.7.1 POS Function

This item is used to enable/ disable this function. Select <On>, the text

database will be created on the hard disk.

3.7.2 POS Overlay

Users can decide when the POS overlay should be displayed on the monitor.

Select <Live> to display the POS overlay in Live mode; select <PB> to

display the POS overlay in Playback mode; or select <Live & PB> to display

in both modes.

NOTE: POS overlay will only be displayed in full-screen mode.

NOTE: PB overlay is available only under ×1 PB speed.