User`s manual

DVR200 Series User’s Manual
23
3.5.4 Per Camera Configuration
This function is used to set the Day / Night / Weekend PPS (Picture per
Second) and Quality for each channel. The Preset Configuration must be set
to <OFF> for accessing these schedules. The menu is displayed as below.
Per Camera Config
Cameral Select
Normal PPS
Normal Qlty
Event Max PPS
Event Qlty
Event Active
Day
30
Mid
30
Best
Both
Night
30
Mid
30
Best
Both
CH01
Weekend
30
Mid
30
Best
Both
 Firstly, select a Camera for setting its record configuration. The image and
recording settings from the selected camera will be displayed on the
screen.
 Move the cursor using Direction keys and press ENTER to select an item.
 Change the value using UP / DOWN keys.
 Press ENTER to confirm the settings or ESC to abort.
 Press ESC to return to Record Setup menu.
Please note that the normal/event PPS for each channel cannot exceed 30
for NTSC system, or 25 for PAL system.
3.5.5 Record Event Video Only
If the DVR shall start recording only when alarms are triggered, follow the
steps below:
 Enter the OSD setup menu with correct password.
 In the OSD setup menu, select <Record Setup> menu. Move the cursor to
the item <Preset Config>, and select <Event only>.
Refer to OSD Setup Manual, section Preset Record Configuration
for more
detailed information.