User`s manual

DVR200 Series User’s Manual

3.2 Enter OSD Setup Menu

The configuration of the DVR can be customized by entering the intuitive

Graphical User Interface (GUI) OSD setup menu. Collaborating with a USB

mouse, setting up the DVR can be easy as operating on a PC. Press MENU

and select an account to login.

The next step is to enter a corresponding password. The preset password for

the administrator account “admin” is “1234”.

NOTE: It is strongly suggested to change the preset password to

prevent unauthorized access to the unit.

An icon displayed at the status bar will show the authority level of the account.

Under logout condition, the “Guest” icon will be displayed. When an account

is logged in, its authority level number (1~8) will be shown.

Before completely logout, other functions can also be accessed without

having to login again. There are two ways to logout: manually logout by

pressing ESC key at Live mode, or auto logout when keys are not pressed for

5 minutes at Live/ Menu mode.

3.2.1 User Management

The DVR provides the option to create up to seven sets of usernames and

passwords with customized authority, excluding the preset “admin” account.

From the Main Menu, select <System Setup>  <User Management> and

the menu is as the following:

User Management

Password Protection

Account Setup

Permissions Setup

Load Default Setting

ENTER

Password Protection

Select <On> to request for username and password for accessing functions

listed in Authority Setup menu, or select <Off> to allow free access.