Specifications

To place an order call (66) 2 331 9364 or e-mail [e-mail]
4
VSI-ProMAX
g
REGCOM / HYDRA BUILT IN
g
ALL AVE INTERFACES IN ONE UNIT
g
FULL REMOTE PC OR DVR PROGRAMMING
g
NEW VIDEO PROCESSING CIRCUITRY
g
DVR TIME / DATE SYNCING TO POS
TILL INTERFACE
POS / Cash Register Interfacing
An additional serial port has been added to allow the
VSI-Pro Max register port to have bi-directional
communication with any till, emulating common
printers, pole displays or customer displays. This
additional port can then send the data to the Hydra /
Regcom Network or send RS-232 or RS-485 directly
to a serial port on the DVR.
Optically isolated RS-232 input selectable has been
added to break the ground loop between the POS/
Cash Register and video system. This completely
seperates the POS / Cash register system from the
video system eliminating till or communication
problems or video noise.
Networking
With the built in Hydra, Regcom, Networker or
Vnetworker functions, the VSI-Pro Max can be a
complete POS / Cash Register interface plus be
configured as a Master (Hydra) and/or Slave
(Regcom) device for up to 16 tills. Therefore
eliminating the use of the stand alone Hydra,
Regcom, Networker or Vnetworker units. Just loop
the RS-485 network from one VSI-Pro Max to the
next. All VSI-Pro Max will then be configured as
Regcom and the last in the loop will be configured as
a Hydra and connect to the DVR. Diagnostic LEDs
indicate the network active and data from the till is
being received to confirm installation wiring.
The VSI-Pro Max is compatible with many 3rd party
DVR protocol for translating the received data from
POS / Cash Registers to the DVR propreitary
protocol. Programmability for backward compatibility
for all AVE network configurations for Hydra/Regcom,
Networker and Vnetworker.
Supports Time / Date syncing of the DVR T/D to the
POS Time and Date for compatible DVRs.
Video
Video AGC circuitry has been added to compensate
for the new low light WDR cameras and UTP twisted
pair adapters that reduce the video level below the
standard 1V P-P. Therefore the VSI-Pro Max will
deliver a constant video level to the DVR in all
conditions maintaining stable text display. Video
Surge Suppression has been added along with an
isolated earth plug to prevent lightning surges as
well.
Processor
With the new 40 Mhz processing speed all the above
functions are possible. With the increased 128K
SRAM high speed buffering and processing is
possible with large data packet processing tills. With
the increased flash program memory of 128K, all
AVE POS, Cash Register, printer, pole displays,
customer displays, Scales, Money Counters, radars,
GPS and all drivers developed by AVE are in one
convenient unit.
Software
The VSI-Pro Max supports PC programming and
firmware updating. It is also compatible with the
Vnetworker protocol so can be programmed and
configured remotely with a compatible DVR.
Power
The VSI-Pro Max as all VSIs uses standard
unregulated 12VDC. Full surge suppression on this
power line prevents interference of common power
supplies from effecting the interface, till or video
system.
Mechanical
The VSI-Pro Max is housed in an electroplated metal
enclosure with powder coated paint for compliance
with all RoHS, CE and FCC standards.