Specifications

TWISTED PAIR
le for the
ng, or run
onnection
the BNC.
Tel: [phone] | Fax: [phone] | Email: [e-mail]
TWISTED PAIR TECHNOLOGY
MOUNTING OPTIONS - WALL MOUNTED
The unit can be unscrewed and easily
opens up to access holes for secure wall
mounting.
Once fixed to the wall the unique design
enables the unit to slide onto the secured
back plate and can be screwed into
position.
The unit can be mounted in any
orientation that suits the application.
ACTIVE TRANSMITTER
VECA UTP
VECA UTP
25
The AVE VECA UTP is a precompensation device
mounted at the camera end to enable the transmitted
video signal to be boosted for longer cable runs.
These advanced devices precompensate for lossy
(loss of data through data degradation over large
distances) and changing resistance of building wire.
User adjustment for video gain and color
enhancement. Has BNC input with UTP or BNC
output. 12VDC Operation
ACTIVE RECEIVER
ARXD
The ARXD Active Receiver is used in conjunction with the AVE
UTP-1500 passive transmitter or VECA UTP when extended
range and quality is required for a full color signal to 1Km or 3000
ft. with CAT 3,4,5,5e,6 UTP wire. Full surge suppression on both
the power and video are standard. Lightning strike suppression
on the video input when properly grounded with the isolated earth
ground lug. Internal AGC (Automatic Gain Control) automatically
compensates for varying line level changes over time due to
lossy cables and connections so no user adjustments required.
Color boost and recovery to regain those brilliant colors even in
the worst environment. Low power 12 VDC operation. Video Error
LED for low or video loss indication.
AXRD