Specifications

TwistPlex Twisted Pair Transmission
The  AVE  UTP  (Unshielded  Twisted  Pair)  Transmitter  /  Reviever  bring  the  ease  of  using  structured  CAT3/4/5/6  cab
transmission and reception of video signals allowing you to take advantage of existing cabling aready installed in a buildi
UTP cable  instead  of the more expensive  coax cable. The unique design  allows  for single handed installation and  c
directly to the rear of a camera. The small size allows direct connection to the rear of the DVR since the same width as 
TWISTED PAIR
Tel: (66)2 331 9364 |   Fax: (66) 2 331 9365 | Email: ave@avethailand.com 
24
PASSIVE UTP TRANSMITTER
AVE-UTP-1500
PASSIVE UTPHUBS
AVE-UTP-4X1500 / 8X1500 / 16X1500
AVE-UTP-1500
AVE-UTP-4X1500. (4 Channel)
AVE-UTP-8X1500. (8 Channel)
AVE-UTP-16X1500 (16 Channel)
CAT5 Breakout
The CAT5 Breakout allows the use of standard CAT5, 5e or
6  to  have  full  10/100mbs  Ethernet  LAN  and  also  the
addition  of  Video  and  Telephone  or  Power  on  the  same
cable.  This  is  an  ideal  solution  to  home  wiring  for  LAN,
telephone, door phone or front door video.  Connectors are
RJ45 for CAT5/5e/6, RJ45 for LAN, RJ45 for Telephone or
Power and BNC for video.
The AVE-UTP Passive Hubs
The AVE  UTP  Passive  Hubs  are  available  in  4,  8,  or  16  channel.
They allow the transmission of video, audio and Pan, Tilt and Zoom
commands  to  be  carried  out  over  UTP  cable,  all  in  a  neat  wall
mountable or table top metal enclosure.
g
Used in multiple camera installations to simplify and neaten cable runs.
g
Built-in  push  cage  clamps  for  individual  UTP  connections  or  common  RJ45  or
CAT5 jacks which can accomadate 4 video cameras in one cable.
g
8 and 16 Camera units have Included Rack Mounting Wings for 19” racks.
The AVE-UTP-1500 Passive Transmitter / Reciever:
Apassive device which allows for the transmission of video, audio
and Pan / Tilt & Zoom or other modulated embedded bi-directional
control signals over Unshielded Twisted Pair (UTP).
This simple device needs no tools to install, just push and hold the
locking buttons, insert the wire and release.
g
Allows a signal to travel up to 2,500 ft / 800m in B&W, or 1,500ft / 460m in colour
using Unshielded Twisted Pair Cable UTP (CAT5 for example).
g
The signal can be Video images or PTZ control commands or both
g
Take advantage of existing cabling that may be installed in a building, or run UTP
cable instead of the more expensive and harder to manipulate coaxial cable.
g
Easy to install
REAR RACK MOUNT
allows front facing
connections
FRONT RACK MOUNT 
allows rear facing
connections