Specifications

DTT
DATE TIME TITLER
Mini Size and highest reliability and
quality offered today in Date, Time and
title Generator. Selections are set
through interactive on-screen
programming. Low power
consumption for covert installations,
character border programmable, 7.5
to 24 VAC / VDC Operation.
19
Tel: [phone] | Fax: [phone] | Email: [e-mail]
ACCESSORIES
AVE offer a wide range of
DVR accessories. For
more information on the
products available or for
assistance to meet your
requirements, please
contact a member of the
AVE sales team.
ACCESSORIES
OPTO232
RS-232 Opto Isolator
for VSI-Pro
.
RS-232 to RS-422/485
Converter
AL-16
RS-232 to 16 Relay Outputs
TDCT-Pro
TIME DATE TITLE
Master/Slave Configurable
For the highest reliability and quality
offered today in Date, Time and title
Generator. Selections are set through
interactive on-screen programming
along with RS-232 commands.
Accuracy to 1/50th PAL or 1/60th NTSC
for individual field counting. 12 VDC
Converts RS-232 signals to either RS-485 or
RS-422 and vice versa. Increases length of
cable when using RS-232 port of any POS,
VSI, or DVR from max 100 ft to 3000 ft.
Supports RTS/CTS flow control for RS-485.
DTT-Pro
DATE TIME TITLER
Mini Size and highest reliability and
quality offered today in Date, Time and
title Generator. Selections are set
through interactive on-screen
programming. Overlays on video
source or generates its own composite
video signal without a camera input.
12 VDC Operation.
Connects directly to the VSI-Pro and optically
isolates POS / Cash Register data inputs
without any additional power source.
T
i
m
e & D
ate
T
i
t
l
e
r
s
DS-20-OF 19” Racks for PCB Level Products
Available for VSI-Pro Ver. 12/13, VSI-Pro Max, VDA-401, RegCom,
Hydra, DTT, DTT-Pro, TDCT-Pro, VMD1001 and VMD1004. Common
12VDC power screw terminal connector.
VSI-Pro
VDA-401
PreMade Cable Adapter
Cables / Connectors
AL-16 I/O 16 Relay Outputs
and 16 Opto Isolated Inputs
Cables for POS / Cash Registers / ATM
connections along with Programming and
custom connections.
Use standard premade power cables with DC
Coax connectors and connect via one power
supply. Independent automatic resetable
fuses per camera with individual power LEDs
and power switch. Removeable fuse for main
power.
The AL-16 accepts commands via RS-232 or
RS-485 and controls the respective Form C
Relay closure. NO & NC & Common screw
terminal connections for each output. 12VDC
The AL-16 I/O accepts commands via RS-232
or RS-485 and controls the respective Form C
Relay with NO, NC & Common. Opto-Isolated
Inputs are read and transmitted per alarm or
polled. Screw terminal connections for each
Input and Output. 12VDC Operation.