VER1.02 VER1.
Installation & Safeguards INSTALLATION & SAFEGUARDS All the safety and operating instructions should be read before the unit is operated. Environment Condition for Installation To prevent electric shock or other hazard, do not expose units to rain, moisture, or dust. This unit should be located in an area with low humidity and a minimum of dust.. Place this unit in a well-ventilated place and do not place heat-generating objects on this unit.
Contents Contents CHAP. 1 Features & Package Contents ---------------------------------------------------------------- 4 1-1. Features ---------------------------------------------------------------- 4 1-2. Package Contents ---------------------------------------------------------------- 5 Function of Each Button ---------------------------------------------------------------- 6 2-1. Front ---------------------------------------------------------------- 6 2-2.
Contents CHAP. 5 Set Up ---------------------------------------------------------------- 20 5-1. Entering the Menu ---------------------------------------------------------------- 20 5-2. Display Setup ---------------------------------------------------------------- 21 1) Screen Display ---------------------------------------------------------------- 21 2) Monitor Setup ---------------------------------------------------------------- 21 5-3.
CHAP. 1 Features & Package Contents CHAP. 1 Features & Package Contents 1-1.
CHAP. 1 Features & Package Contents 1-2. Package Contents 1. DVR Main Unit 2. Power Cable 5. Software CD 3. Power Adapter 6. Rubber Pad 4. User’s Manual 7. HDD absorber Package Contents Description 1. DVR Main Unit STAND-ALONE DIGITAL VIDEO RECORDER 2. Power Cable AC power supply to adapters for 12 V DC power 3. Power Adapter 12 V DC power supply 4. User’s Manual User’s Manual 5. Software CD Remote Viewer Software & Back up CD player 6. Rubber Pad Prevent DVR from slipping.
CHAP. 2 Function of Each Button CHAP 2. Function of Each Button 2-1 FRONT Name Function ① LED Lamps Shows status of operation ② USB Device Firmware upgrade by connecting PC with latest firmware to USB port ③ Camera selection & PTZ camera control 1. Pressing this button will display a full screen image of that camera ④ Record / Playback 2.
CHAP.
CHAP. 2 Function of Each Button 2-2. REAR Name 1 RS 485 Function Connection with PTZ Camera or other external device using RS 485 interface RELAY Output Relay out terminal SENSOR Input Sensor input terminal 2 RS-232C 3 ETHERNET 4 CAMERA Input 5 MONITOR Output 6 VCR Output 7 DC Power Connection to external device as PC using RS-232C to control the DVR Connection to ETHERNET device Connection with camera Connection with Composite Monitor Connection with VCR for analog backup DC 12V 5.
CHAP. 3 CHAP.3 Installation 3-1.
CHAP. 3 Installation 3-2. Detailed Installation 1) HDD Connection 1. Connect Main Board and HDD1 using IDE cable and HDD power cable. 2. The jumper setting of HDD1 should be on Master if you install only one HDD. 3. The jumper setting of HDD1 should be on Master and HDD2 should be on Slave if you install two HDDs (Refer to the above figure) 4. Stick the HDD absorber (included in package) on the bottom of case and then install the HDD on top of them by using the bolts (included in package). 5.
CHAP. 3 2) Camera Connect cameras to the camera input on rear panel of DVR marked CAMERA IN. 3) Monitor Connect the video output marked MONITOR to Video-In of Main monitor. 4) Power Connect DC 12V 5.83 A Adaptor to the back side of Power Jack. Notice To avoid accidental deletion of HDD data, please make sure to press MENU button before power off the unit. This takes the unit out of record mode for safe shutdown.
CHAP. 3 5) VCR, VIDEO PRINTER Connect VCR or VIDEO Printer to VCR out on the rear panel of DVR. 6) Other External Device RS-232C : Control DVR through RS-232C port by using PC. RS-485 : Control external device like PTZ Camera RELAY Output : Relay Output SENSOR Input : SENSOR Input (Pin No.6~25 at Terminal ) ETHERNET : Connection to LAN, WAN, Internet.
CHAP. 3 Installation 7) Connector Pin Assignment No Description NO Description 1 N/C N/C 6 N/C N/C 2 RxD Receive data 7 N/C N/C 3 TxD Transmit data 8 N/C N/C 4 N/C N/C 9 N/C N/C 5 GND Signal Ground 8) RS-232C ASCII-code Following ASCII-Codes(Hexa-Code) are for programmers who want to control DVR unit via the RS232C Port using keyboard of PC. Most of ASCII-Code is 1 Byte and key release is 3 Byte.
CHAP. 4 Operation 4-1. System Log-In 1) To enter into the setup menu, press the [MENU] button. DVR LOG-IN 2) Enter password with channel number button from No.1 to No.10 on the front of the DVR unit. (Maximum of 8 digits are available) ENTER PASSWORD : _ _ _ _ _ _ _ _ 3) After inputting the password, press the [ENTER] button. INPUT YOUR OWN PASSWORD TO EXIT, PRESS [MENU] ※ Use [LEFT] button to delete.
CHAP 4. Operation 4-3. Display Configuration HDD Status In live mode : Amount of data recorded In Playback mode : Amount of data played ETHERNET status Connected Disconnected 3. Status of DVR system Emergency Record (Red) Schedule Record (Green) Record Stop (White) Stop Forward Playback Backward Playback Pause 1/16~1/2x forward playback 1/16~1/2x backward playback 2~4x forward playback 2~4x backward playback 16~64x forward playback 16~64x backward playback 1.
CHAP. 4 Operation 2) View in Sequence Press [SEQ] button. It automatically displays full screen images in sequence. CH16 …… CH02 ● ● CH01 ● 3) Freeze View Full display mode : If you press the [FRZ] button, the FRZ icon will be activated on the screen and “F” character will be shown beside camera title, and live image will be frozen. Split display mode : If you press the [FRZ] button, the FRZ icon will be activated on the screen. press the channel button which you want to freeze.
CHAP. 4 Operation 4-5. Record Recording mode set before delivery by manufacturer (Default recording mode) is Schedule Recording. In this default recording mode, it records 24 hours/day continuously in weekday and on the weekend. Once you press the [REC] button while you see live view, the record type is changed to Emergency Record mode.
CHAP. 4 Operation 4-7. Search Press [SEARCH] button, and 3 different methods for searching recorded data are available as shown in following SEARCH window. For selecting searching method, use direction key or [+] [-] buttons. After selecting each search method, press [ENTER] button for playback. exit, press [MENU] button. 1) SEARCH BAR Search by percentage of total recorded data. It starts from image corresponding to set % of data on the search bar. 2) TIME/DATE Search by time & date.
CHAP. 4 Operation 4-8. PAN/TILT/ZOOM Camera Operation Press [PTZ] button first for PTZ control mode. Numeric buttons from 1 to 16 and direction buttons are assigned for each PTZ command, and user can control PTZ camera connected to DVR unit by pressing any one of those 20 buttons, one after the other, as needed, and it is just like control by separate PTZ controller.
CHAP. 5 Set Up CHAP. 5 Set Up 5-1. Entering into the Menu Enter into SYSTEM MENU by pressing [MENU] button.
CHAP. 5 Set Up 5-2. DISPLAY SETUP Setting up parameters for monitor and display on screen. Enter into SYSTEM MENU-DIPLAY SETUP. DISPLAY SETUP LIVE PLAYBACK SCREEN DISPLAY MONITOR SETUP COLOR BAR TEST SELECT MENU : ▲▼, & [ENTER] 1) SCREEN DISPLAY 1 2 3 4 Setting up the screen display in LIVE mode and PLAYBACK mode. Select the sub-menu which you would like to set using direction buttons and then change ON/OFF with [ENTER] button. 5 1. TIME/DATE : Display time & date 2.
CHAP. 5 Set Up 5-3. CONFIGURATION Various parameters for system can be set in CONFIGURATION menu. Enter into SYSTEM MENU-CONFIGURATION and press the [ENTER] button.
CHAP. 5 Set Up 2) TIME/DATE SETUP Set time and date of DVR system which is very important for search with time and date of the event. Time and date set by manufacturer is different from local time of user, and user must set time and date exactly in the first operation. Set time & date using direction buttons and [+] [-] button. TIME/DATE SETUP YEAR MONTH DAY HOUR MINUTE SECOND 2005 / JUN /11 PM14:06:45 SELECT : ▲▼, CHANGE VALUE : + - 3) CAMERA SETUP CAMERA TITLE SETUP CAMERA SETUP 0123456789 .
CHAP. 5 Set Up CAMERA ACTIVE SETUP MOTION CONFIGURATION CH STATUS LIVE REC --------------------------------------------------------------------------01 02 03 04 05 06 07 08 ACTIVE ACTIVE LOSS ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ON ON OFF ON ON ON ON ON SENSITIVITY GRADE RECORD DURATION ON ON OFF OFF ON ON ON ON 01 05 SEC SELECT ▲▼, CHANGE VALUE : + - SELECT : ▲▼ ◀▶, & [ENTER] (3) CAMERA ACTIVE SETUP : With direction button, move to option to be changed, and press [ENTER] button to select [ON/OFF].
CHAP. 5 Set Up INTERVAL SETUP SWICHING INTERVAL 4) INTERVAL SETUP FULL SCREEN Set the switching time interval for SEQ function. (1 sec. ~ 99 sec.) : 01 SEC EVENT RECORD EVENT UPDATE TIME : 01 SEC FULL SCREEN : set the sequencing switch time interval in live full screen. SELECT ▲▼◀▶, CHANGE VALUE : + - EVENT UPDATE TIME : Set the minimum time interval of event to be listed in EVENT LIST.
CHAP. 5 Set Up 6) BUZZER SETUP BUZZER SETUP Set parameters for buzzer (On or Off). Use direction button and [ENTER] button. KEY BEEP : buzz when button is pressed. VIDEO LOSS : buzz when video signal is lost. ALARM ACTIVE : buzz when alarm is activated. MOTION DETECT : buzz when motion is detected. ALL ON KEY BEEP ON VIDEO LOSS ON ALARM ACTIVE ON MOTION DETECT ON User can set all buzzers at On/Off at once by set ALL at ON/OFF. SELECT : ▲▼, & [ENTER] 7) PASSWORD SETUP Set user ID and password.
CHAP. 5 Set Up 5-4. RECORD SETUP This is the most important configuration of the DVR. Enter into SYSTEM MENU-RECORD SETUP and press the [ENTER] button. 1) RECORD CONFIGURATION Use direction button to move and [+] [-] button to set value. RECORD SETUP RECORD CONFIGURATION SCHEDULE SETUP HOLIDAY SETUP (1) OVERWRITE : Set overwrite or stop recording when the HDD is full. (2) MULTIPLEX - DUPLEX : Playback / Ethernet - TRIPLEX : Playback / Recording / Ethernet (3) QUALITY : Set recording picture quality.
CHAP. 5 Set Up 2) SCHEDULE SETUP Unless you selected other recording mode, DVR system records in Schedule Recording mode. In SCHEDULE REC SETUP, you set type of recording for every time interval of 2 hours in each day of the week. Schedule Recording set by manufacturer is recording continuously at its full recording speed, and it means DVR system record continuously at 60 ips in total at 720x240 resolution.
CHAP. 5 Set Up 5-5. BACK-UP User can back up the recorded data to CD using CD writer installed in DVR. Refer to [START] and [END] of data on HDD and set copy from time, [START], and size of data copied, [SIZE], and move to BURN and press [ENTER] button to start copy.
CHAP. 5 CONNECTION SETUP Set Up DHCP SETUP TIMEOUT 200 MSEC RETRY COUNT 08 DHCP MODE MANUAL DNS SERVER 000.000.192.168 IP ADDRESS 192.168.001.160 SUBNET MASK 255.255.255.000 GATEWAY 192.168.001.001 SELECT : ▲▼, CHANGE VALUE : + - SELECT MENU : ▲▼, & [ENTER] (2) DDNS SETUP : Set DDNS (Please contact you vendor.) (3) CONNECTION SETUP : Set of connection status - TIME OUT : Set limit time on connection (MSEC is 1/1000 sec). If network speed is slow, increase value of TIME OUT.
CHAP. 5 Set Up 5-7. FACTORY DEFAULT Set the all system parameters as manufacturer first set before delivery. It is a kind of system initialization, and manufacturer recommends to do it when you add new HDD or other changes in system to make all system ready for normal operation. Use direction button to move and Press [ENTER] button to change parameters. After move to RUN, Press [ENTER] button for actual Factory Default setting.
CHAP. 6 Network Setup CHAP. 6 Network Setup 6-1. DVR Network Configuration Please call your provider to identify what type of service they are providing you.
CHAP. 6 Network Setup 1) Static IP User input IP address in IP CONFIG SETUP which is assigned from ISP company. 1. Verify if IP address is OK or not with PC before connecting DVR. 2. Connect LAN cable to DVR after confirmation. 3. DVR : MENU EXTERNAL DEVICE TCP/IP 4. Set DHCP to MANUAL and go into TCP/IP SETUP. 5. Verify if MAC ADDRESS starts from 00-0A-A2…. 6. Input IP address which is assigned from ISP company. 7. Set IP PORT. (50000 recommended) 8. Input GATEWAY which is assigned from ISP company.
CHAP. 6 Network Setup 2) Dynamic IP 1. Verify if IP address is OK or not with PC before connecting DVR. 2. Connect LAN cable to DVR after confirmation. 3. Turn off and on Modem (Router) which is provided by ISP company. This is to reset client of MAC from ISP company. User have to wait for 30 seconds after turning on. 4. Turn off and on DVR. 5. DVR : MENU EXTERNAL DEVICE TCP/IP 6. Verify if MAC ADDRESS starts from 00-0A-A2…. 7. Set DHCP to AUTOMATIC and detect IP to get Dynamic IP. 8.
CHAP. 6 Network Setup 3) Dynamic IP of PPPoE (DSL) DVR doesn’t support DSL (PPPoE), user have to set NETWORK with IP SHARE if user need to access DVR remotely. At this time, User have to port forward on DVR. Please contact IP SHARE Manufacturer if you need to know how to forward port. Even though user have Static/Dynamic IP, if user want to use another device (PC) through IP SHARE, user can set NETWORK as follows, 1. Verify if IP address is OK or not with PC before connecting DVR. 2.
CHAP. 6 Network Setup 6-2. Remote Viewer program MAIN INTERFACE 1 6 7 8 5 2 1 2 3 4 5 6 7 8 3 4 - Power button : Press the Power switch to exit the program. Please disconnect the live feed before powering off the software - Connect button : Press the Connect button to view the live images from the DVR. These are the same images being displayed on the monitor of the DVR, with a delay depending on your internet connection at both the DVR location and from where you’re currently accessing.
CHAP. 6 Network Setup IP/PORT Setting Screen IP List MANUAL DDNS Input IP address and PORT manually Receive IP address and PORT from DDNS Server. For further information of DDNS, please contact your vendor. Name Address PORT ID Password Name of IP address on the list. Input IP address which is set on DVR Input PORT which is set on DVR Input ID which is set on DVR. (Please input ‘admin’.) Input password which is set on DVR IP List It shows IP list which user input manually.
CHAP. 6 Network Setup PTZ/SAVE Setting Screen Circular Monitoring Interval : This indicates the speed of the channels sequence when the SEQUENCE button is used from the main interface. Scan Rate : Set speed of playback. PTZ TYPE : Select PTZ camera which is connected to DVR. PTZ Baud Rate : Enter the Baud Rate of your PTZ camera. Set Path to Save Downloaded image : Determines the location and folder on your PC where the downloaded video clips are stored.
CHAP. 6 Network Setup PLAYBACK INTERFACE through Remote Viewer 2 1 3 7 8 9 10 4 5 6 Function of each button in Search window. 1 2 3 4 5 6 7 8 Exit : Exit to live window. Full screen : Select a certain camera to view in full screen. Quad : To view quad mode (4 channels at the same time) Time : The recording time & date information of the pictures which is being played. Channel selection : Select each camera. Time selection : Select a time from which user want to see.
CHAP. 6 Network Setup : Play fast backward : Move to the start of recording : Play backward(1X) : Move to the previous hour : Play forward(1X) : Move to the afterward hour : Play fast forward : Move to the end of recording : Stop playback 9 : Command button. a) SAVE : After pressing the Stop button, click SAVE button to save the currently viewed image in jpg format. b) PRINT : After pressing the Stop button, click PRINT button to print the currently viewed image.
CHAP. 6 Back-up CD Player 6-3. Back-up CD Player 1 9 2 3 b e c g 4 d a f 8 5 7 1 2 3 4 5 6 7 8 9 6 DVR units are with a built-in CD-RW, and user can copy images to CD. Using back-up CD player, user can see images on back-up CD, and function of each button in Back-up CD player is as below. Time : Current time. Status Window : Start & End of time & date, Status of operating button. When user play forward/backward, recorded time will appear.
CHAP. 6 Back-up CD Player Image EDIT 1 Contrast a a Sharpness 2 b b Blur Brightness Save Print a Exit b c 3 1. Image Edit Status Window : Shows record time & date, Image size, Command status. 2. Edit Button : User can adjust color tone of copied images using this button.
CHAP. 7 Specifications CHAP.
CHAP.
Best Picture Quality - JPEG2000 45
