- 1 16 Channel Digital Video Recorder User's Manual

ManualsBrandsMaxtor ManualsDVR1 16 Channel Digital Video Recorder

16 Channel Digital Video Recorder

User’s Manual

Summary of content (67 pages)

PAGE 1
6 Channel Digital Video Recorder User’s Manual 1
PAGE 2
Safety Precautions CAUTION RISK OF ELECTRICAL SHOCK. DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This label may appear on the bottom of the unit due to space limitations.
PAGE 3
About this document Before installing stand alone DVR, be sure to thoroughly review and follow the instructions in this Users Manual. Pay particular attention to the parts that are marked NOTICE. Also, when connecting with external application, first turn the power OFF and follow manual instruction for appropriate installation. Before reading this document 1. This document is intended for both the administrator and users of stand alone DVR Model. 2.
PAGE 4
Content Safety Precautions………………………………………………………………………………………………… 2 About this document………………………………………………………………………………………………. 3 Before reading this document……………………………………………………………………………………. 3 Unite Description of Front Panel………………………………………………………………………………… 5 Unit Description of Rear Panel……………………………………………………………………………………6 Installation………………………………………………………………………………………………………….. 7 Function Setup…………………………………………………………………………………………………….. 15 Login………………………………………………………………………………………………………….
PAGE 5
Unit Description of Front Panel 16 / 9 / 4 split screen 1 ~ 16 full screen Water Mark function Freezer / Zoom / Sequence / Information / Audio Menu button MENU : Play button PLAY : Record button REC : Key lock button LOCK : Data back up button BACKUP : Time search playback button T-SRH : Function exit button ESC : Value change button Direction UP / Down, Direction Left / Right Record and play stop, Playback forward or reverse. Playback pause / steps.
PAGE 6
Unit Description of Rear Panel Power cord in 12V/5A, power switcher (ON / OFF) Camera 1 ~ 16 in and 75 Ohm ON/OFF (high/low adjust) looping out Audio channel input x 1 and output x 1 Call Monitor. Channel sequence 1 ~ 16. Main Monitor output RS-485 control keyboard connector S-Video (Y/C) monitor RS-232 connector (ISP. For RD control) VG A VGA output. PC monitor connector. (Optional) Alarm connector LAN Call Monitor. Channel sequence 1 ~ 16. Stop on full channel when event happens.
PAGE 7
Installation Procedure 1) Camera Connection DC LEVEL Connect the camera to the CAMERA INPUT V.P CH1 CH2 CH3 VIDEO CH4 DC MONITOR on the Rear Panel of the 16 CH DVR. CH1 CH2 CH3 CH4 VIDEO LENS AC24V/DC12 Rear part of CAMERA 2) Monitor Connection (Composite Connection Method) Connect the monitor to the MONITOR OUT on CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 MONITOR the Rear Panel of the 16 CH DVR.
PAGE 8
NOTICE: Sensor input is RECOGNIZED as LOW when alarm signal is on a level with GND, and it is recognized as HIGH when alarm signal is FLOATING or 5V. Following is internal circuit. 5 V Internal Circuit D1 Thus, there is a danger of damage, when the sensor input goes to a Negative level or voltage higher than 5V. 5) Network Connection DVR connects to LAN ETHERNET rks TERATRAY CONNECTION ◆To view video image on the computer through internet with DVR view software.
PAGE 9
5) HDD connection 1 How to connect single HDD 2 I/O BOARD How to connect 2 HDD I/O BOARD 1 2 1 1 MASTER tie 2 2 MAIN BOARD HDD1 3 MASTER MAIN BOARD 3 HDD SLAVE HDD2 3 Set the drive jumpers as specified by hard disk drive manufacturer. 1. 2. 3. Make sure the HDD is MASTER. Make sure the cable connector is correct. Please check the HDD panel for Master set up. Set the drive jumpers as specified by hard disk drive manufacturer. 1. 2. 3. Make sure the HDD is MASTER and SLAVE.
PAGE 10
Picture Full screen or split screen display Press button, to display 16 / 9 / 4 quarterly split screen. Press numeric buttons to display the desired camera image in full screen. 1.) FREEZE Mode 1. In live mode press 2. Press 2.) (FREEZE) button to freeze image. again to cancel freeze mode. Zoom Mode(Display Enlargement.) Go to full screen mode with numeric buttons at live or playback mode, then press ZOOM button to display screen Enlargement. Use button to move position. 3.
PAGE 11
6.) BACKUP. Image backup mode.(Image back up must be done on playback mode only.) Locate the playback point of which you want. Press BACKUP, back up menu shows: CDRW / USB CDRW BACKUP MENU USB BACKUP MENU BACKUP MENU START BACKUP TO CDR CDR WRITE SPEED x1,x2,x3 FORMAT USB FORMAT USB START BACKUP TO CDR START BACKUP TO USB CDR WRITE SPEED START BACKUP TO USB USB: The BACKUP CAUTION window pop-up. Press ENTER to begin data back up. Capacity of USB device is not limit.
PAGE 12
Compatible USB: Transcend 256 MB, 1 GB / A-DATA, 512MB / USB Flash Drive 128 MB / Intelligent Stick 256 MB / SOLOMON 128 MB / ISTEC 1GB. CD-RW: xxx K (Presently back up progress) Press BACKUP to stop saving. Or wait for CD is full done. xxx K Data only read in Netviewer. 7.) Key Lock function >On the Live mode, press (lock), Only, numeric, freeze, auto, and zoom buttons could work. Press lock key again to enter the login-in window. Enter admin or user password to unlock.
PAGE 13
Playback 1. Playback Mode 1) Press PLAY button to begin playback. (System playback the images backward) 2. T-SRH button MAIN PLAY PAGE 1) T-SRH: Playback by time search. Press T-SRH button to active playback function. 1.MASTER TIME LIST 2.SLAVE TIME LIST 3.MASTER EVENT LIST Press direction button 4.SLAVE EVENT LIST UP/DOWN to choose 5.GOTO DATE: 2004/12/31 items. 6.GOTO TIME: 12:12 7.
PAGE 14
2) EVENT LIST (Alarm List): Event source- Video loss / Alarm trigger / Motion / Record EVENT LIST NO Y / M / D H : M CH +10 EVENT 10 items display on each page / Total 5000 items display for 500 pages. When event list is out of compass, the total items are less then 5000. NO Y / M / D H : M CH EVENT >Event happens time and list. CH: Event Channel Display. >1 CH ~ 16 CH +10 : Display pages by 10 units / +100 : Display pages by 100 units / +1000 : Display pages by 1000 units.
PAGE 15
Function Setup LOGIN 1) Press MENU button to enter into menu. You could do the system function setup in MENU. 2) Password enter window pop-up: CHECK PASSWORD MENU Default password (Account-Admin) : 44444 Default password (Account-User) : 11111 PASSWORD (*****) 3) Press numeric (1 ~ 10 )button or remote controller ( 1 ~ 10 )to choose password. 4) Remote controller function buttons are same as DVR panel function buttons.
PAGE 16
Basic Operation Press MENU button to enter MAIN SETUP PAGE. MAIN SETUP PAGE 1. HDD INFORMATION 2. DATE-TIME SETUP 3. DISPLAY SETUP 4. CAMERA SETUP 5. BUZZER SETUP 6. RELAY SETUP 7. SYSTEM SETUP 8. ADVANCED SETUP MENU, ESC: EXIT, ENTER: RUN 1) Use direction button up/down button to select setup item. 2) Press (ENTER) button to enter into sub-menu function setup. 3) Press sub-menu item with direction button up/down or left/right button.
PAGE 17
1. HDD INFORMATION MAIN SETUP PAGE 1. HDD INFORMATION POSITION 2. DATE-TIME SETUP MASTER 3. DISPLAY SETUP LAST TIME 4. CAMERA SETUP SLAVE 5. BUZZER SETUP LAST TIME 6. RELAY SETUP 7. SYSTEM SETUP MENU, ESC: EXIT, 8. ADVANCED SETUP MENU, ESC: EXIT, ENTER: RUN - 2 hard disk information display. Information display: POSITION SIZE SIZE USED BRAND >POSITON: Master / Slave >SIZE: Hard Disk capacity. xxGB. Maximum display is 999MB >USED: 00 ~ 100 %. Hard disk overwrites 100 ~ 199 %.
PAGE 18
2. DATE-TIME SETUP MAIN SETUP PAGE 1. HDD INFORMATION DATE-TIME SETUP PAGE 2. DATE-TIME SETUP 1. DATE 2000 / 00 / 00 3. DISPLAY SETUP 2. TIME 4. CAMERA SETUP 3. FORMAT 5. BUZZER SETUP 3. DISPLAY AT xx LINE(S) 6. RELAY SETUP 7. SYSTEM SETUP MENU, ESC:EXIT, :MODIFY 8. ADVANCED SETUP MENU, ESC: EXIT, ENTER: RUN 1. DATE 2. TIME: > Use direction button up/down choose position, values change button to change date and time values. Do not need to stop hard disk working (Play or record). 3.
PAGE 19
3. DISPLAY SETUP MAIN SETUP PAGE 1. HDD INFORMATION DISPLAY SETUP PAGE 2. DATE-TIME SETUP 1. DATE-TIME ON 3. DISPLAY SETUP 2. CAMERA TITLE ON 4. CAMERA SETUP 3. PB DATE-TIME ON 5. BUZZER SETUP 4. PB CAMERA TITLE ON 6. RELAY SETUP 5. PB DUMMY CAMERA STAY 7. SYSTEM SETUP 6. DVR STATUS ON 8. ADVANCED SETUP 7. BORDER COLOR WHITE MENU, ESC: EXIT, ENTER: RUN MENU, ESC:EXIT, :MODIFY 1. DATE-TIME: Date and Time caption display mode on or off setup. >ON / OFF 2.
PAGE 20
4. CAMERA SETUP MAIN SETUP PAGE CAMERA SETUP PAGE 1. HDD INFORMATION 1. COLOR SETUP 2. DATE-TIME SETUP 3. DISPLAY SETUP 4. CAMERA SETUP 5. BUZZER SETUP 6. RELAY SETUP 7. SYSTEM SETUP 2. TITLE SETUP 3. SCREEN POSITION SETUP 4. V-LOSS DISPLAY SETUP 5. VIDEO MASK SETUP MENU, ESC: EXIT, ENTER: RUN 8. ADVANCED SETUP MENU, ESC: EXIT, ENTER: RUN COLOR SETUP PAGE (1.) COLOR SETUP ** CHANNEL NUMBER CAMERA SETUP 1. COLOR SETUP 2. TITLE SETUP 3. SCREEN POSITION SETUP 1. BRIGHTNESS 00 2.
PAGE 21
(2.) TITLE SETUP: Input TITLE of each camera. 8 characters can be input. TITLE SETUP PAGE CAMERA SETUP 1. COLOR SETUP 2. TITLE SETUP 3. SCREEN POSITION SETUP 4. V-LOSS DISPLAY SETUP 5.
PAGE 22
(3.) SCREEN POSITION SETUP **** SCREEN POSITION**** UP CAMERA SETUP 1. COLOR SETUP LEFT RIGHT 2. TITLE SETUP 3. SCREEN POSITION SETUP DOWN 4. V-LOSS DISPLAY SETUP ENTER : DEFAULT 5. VIDEO MASK SETUP ESC : QUIT 1. Press direction buttons up/down/left/right to move screen position. 2. Press ENTER button for default. 3. Press ESC button to quit.
PAGE 23
(4.) V-LOSS DISPLAY SETUP VLOSS SETUP PAGE **V-LOSS FUNCTION: CAMERA SETUP CH 01 : ON CH 09 : ON 1. COLOR SETUP CH 02 : ON CH 10 : ON 2. TITLE SETUP CH 03 : ON CH 11 : ON 3. SCREEN POSITION SETUP CH 04 : ON CH 12 : ON 4. V-LOSS DISPLAY SETUP CH 05 : ON CH 13 : ON 5.
PAGE 24
(5.) VIDEO MASK SETUP VIDEO MASK SETUP PAGE **VIDEO MASK FUNCTION: CAMERA SETUP 1. COLOR SETUP 2. TITLE SETUP 3. SCREEN POSITION SETUP 4. V-LOSS DISPLAY SETUP 5.
PAGE 25
5. BUZZER SETUP MAIN SETUP PAGE BUZZER SETUP PAGE 1. HDD INFORMATION **BUZZER FUNCTION 2. DATE-TIME SETUP BUTTON BUZZER ON 3. DISPLAY SETUP ALARM BUZZER ON 4. CAMERA SETUP MOTION BUZZER ON 5. BUZZER SETUP V-LOSS BUZZER ON 6. RELAY SETUP HDD-FULL BUZZER ON 7. SYSTEM SETUP CRASH ON BUZZER ON 8. ADVANCED SETUP MENU, ESC: EXIT: : MODIFY MENU, ESC: EXIT, ENTER: RUN **BUZZER FUNCTION: All buzzer function >ON / OFF 1. BUTTON BUZZER? > ON / OFF 2. ALARM BUZZER? > ON / OFF 3.
PAGE 26
6. RELAY SETUP MAIN SETUP PAGE 1. HDD INFORMATION RELAY SETUP PAGE 2. DATE-TIME SETUP **RELAY FUNCTION: ON 3. DISPLAY SETUP 1. ALARM RELAY: ON 4. CAMERA SETUP 2. MOTION RELAY: ON 5. BUZZER SETUP 3. V-LOSS RELAY: ON 6. RELAY SETUP 4. HDD-FULL RELAY: ON 7. SYSTEM SETUP 5. CRASH ON RELAY: 8. ADVANCED SETUP MENU, ESC: EXIT, ENTER: RUN **RELAY FUNCTION: ON / OFF 1. ALARM RELAY: ON / OFF 2. MOTION RELAY: ON / OFF 3. VLOSS RELAY: ON / OFF 4.
PAGE 27
7. SYSTEM SETUP MAIN SETUP PAGE SYSTEM SETUP 1. HDD INFORMATION 1. DWELL INTERVAL 2. DATE-TIME SETUP 2. LANGUAGE 3. DISPLAY SETUP 3. VIDEO INPUT 4. CAMERA SETUP 4. RS-485 ID 5. BUZZER SETUP 5. RS-485 PROTOCOL 6. RELAY SETUP 6. RS-485 BAUD RATE 7. SYSTEM SETUP UPTIME: xx HRS 8. ADVANCED SETUP MENU, ESC: EXIT: : MODIFY MENU, ESC: EXIT, ENTER: RUN SYSTEM SETUP 1. DWELL INTERVAL: - 0 ~ 999SEC. Full channel and call monitor auto sequence time. 2. 3. 4.
PAGE 28
8. ADVANCED SETUP MAIN SETUP PAGE ADVANCED SETUP PAGE 1. HDD INFORMATION 2. DATE-TIME SETUP 3. DISPLAY SETUP 4. CAMERA SETUP 5. BUZZER SETUP 6. RELAY SETUP 7. SYSTEM SETUP 1. ALARM SETUP 2. MOTION SETUP 3. RECORD SETUP 4. PASSWORD SETUP 5. NETWORK SETUP 6. HDD FORMAT 7. FACTORY DEFAULT 8. ADVANCED SETUP 8. SOFTWARE UPDATE MENU, ESC: EXIT, ENTER: RUN ADVANCED SETUP PAGE 1. ALARM SETUP 2. MOTION SETUP 3. RECORD SETUP 4. PASSWORD SETUP 5. NETWORK SETUP 6. HDD FORMAT 7.
PAGE 29
2. MOTION SETUP MOTION SETUP PAGE ADVANCED SETUP PAGE **MOTION FUNCTION ON 1. ALARM SETUP **MOTION DURATION 2. MOTION SETUP **CHANNEL NUMBER 3. RECORD SETUP 1. SENSITIVITY 4. PASSWORD SETUP 2. VELOCITY 5. NETWORK 3. ACTIVATION SETUP 6. HDD FORMAT 4. RELAY 7. FACTORY DEFAULT 5. MOTION AREA SETUP 8. SOFTWARE UPDATE MENU, ESC: EXIT: : MODIFY MOTION SETUP **MOTION FUNCTION (For all channels) -ON / OFF **MOTION DURATION -0 ~ 9999. Motion buzzer and record duration time.
PAGE 30
> MOTION AREA SETUP < All area detect with factory default. Press ENTER button to change mode and then increase or reduce. For example: Clear lattices Press value change button to reduce. Add lattices Press value change button to reduce. Icon: Press to increase all area, press to reduce all area. Icon: Press Up / Down / Left / Right direction key to move, press to increase lattices; press Icon: + Press Up / Down / Left / Right direction key to move and increase area.
PAGE 31
3.
PAGE 32
2) RECORD SPEED: Record FPS setup -1/30(1/30), 1/15(1/15), 1/10(1/10), 1/5 (1/5), 1/3 (1/3), 1/2 (1/2), 1(1), 2(2), 3(3.13), 5(5), 10 (8.33), 15(12.5), 30(25), 60(50), 120(100). NTSC / (PAL) 3) RECORD MODE: Record mode setup. -ALWAYS / SCHEDULE / EVENT / EVENT ON SCHEDULE / EVENT + SCHEDULE 4) RECORD AUDIO: Audio record setup -ON / OFF. (Suggest not fewer than 5 fps.
PAGE 33
>SCHEDULE SETUP< RECORD SETUP 1. HDD FULL Press direction buttons up/down to 2. RECORD SPEED SCHEDULE items. 3. RECORD MODE 4. RECORD AUDIO Press values change button to change values. 5. QUALITY 6. SCHEDULE SETUP Factory default is everyday all schedules time on 7. CHANNEL SETUP recording. SCHEDULE SETUP CURSOR STEP 30MIN / 6MIN SUN MON TUE WED THU FRI SAT Press direction buttons up/down/left/right to see date and time difference.
PAGE 34
30MIN SCHEDULE SETUP CURSOR STEP SUN 00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00 00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30 MON 00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00 00:30 01:30 02:30 03:30 04:30 05:3
PAGE 35
7) RECORD CHANNEL SETUP PAGE RECORD CHANNEL SETUP PAGE RECORD SETUP 1. HDD FULL 2. RECORD SPEED 3. RECORD MODE 4. RECORD AUDIO 5. QUALITY 6. SCHEDULE SETUP 7.
PAGE 36
4. PASSWORD SETUP ADVANCED SETUP PAGE 1. ALARM SETUP 2. MOTION SETUP 3. RECORD PASSWORD SETUP PAGE SETUP 1. LEVEL:( ) 4. PASSWORD SETUP 2. ADMIN:( ) 5. NETWORK 3. USER :( ) SETUP 6. HDD FORMAT 7. FACTORY DEFAULT 8. SOFTWARE UPDATE 1) Press direction buttons up/down/left/right to LEVEL (Log In level ID type setup) Choose items position. >NONE / ADMIN / USER -ADMIN Press values change button to change values. -USER -NONE, user does not need to insert password before enter in MENU.
PAGE 37
5. NETWORK SETUP ADVANCED SETUP PAGE TCP-IP SETUP PAGE 1. ALARM SETUP 1. SPEED:>512K 2. MOTION SETUP 2. DVR NAME:[dvr16] 3. RECORD SETUP 3. NET TYPE: OFF 4. PASSWORD SETUP 4. STATIC IP SETUP 5. NETWORK 5. PPPOE ID SETUP SETUP 6. HDD FORMAT 6. DNS/DDNS SETUP 7. FACTORY DEFAULT 7. SERVER PORT SETUP 8. SOFTWARE UPDATE MAC ADDR: xx.xx.xx.xx.xx.xx 1. SPEED : >512K / 512K / 256K / 128K / 64K > Upload speed. Choose the close speed by applied. 2. DVR NAME: [ x 15 space ] 3.
PAGE 38
5. PPPOE ID SETUP If users apply the dynamic IP from ISP, then should input ID and password that from ISP information list. And then go to set DNS/DDNS SETUP For example: Address name is 123456@hinet.net.tw Password is 654321 PPPOE ID SETUP PPPOE ID SETUP 1. LOGIN ID: [ x 20 space] 1. LOGIN ID: [ 123456@hinet.net.tw] 2. 2. :[ x 20 space] :[ 3. PASSWORD: [ x 20 space] 3. PASSWORD: [ 654321] 4. CLEAR PPPOE SETUP 4. CLEAR PPPOE SETUP ] Or Notice: PPPOE ID SETUP 1.
PAGE 39
6. DNS/DDNS SETUP Whatever user apply a free or pay DDNS, user needs to input every thing below. DDNS apply: User can get a free hostname or pay from website below. 1. http://www.3322.net/ (China) 2. http://www.changeip.org/ 3. http://www.dyndns.com/ 4. http://www.no-ip.com/ 5. http://www.dhs.org/ 6. http://www.dtdns.com/index.cfm?fuseaction=info.hosts For example: Go to: http://www.dtdns.com/index.cfm?fuseaction=info.hosts Click sign up to create an account.
PAGE 40
Fill your information to sign up paper. After, go to email account to get activate ID and code.
PAGE 41
Fill ID and code.
PAGE 42
Type Hostname and choose a domain name, and then click Add Hostname. EX: Hostname = Myhostname, Domain = 4irc.
PAGE 43
Data confirm done, then you can go to DVR advanced setup Network setup now. Advanced setup TCP-IP SETUP TCP-IP SETUP PAGE TCP-IP SETUP PAGE 1. SPEED:>512K 1. SPEED:>512K 2. DVR NAME:[dvr16] 2. DVR NAME:[Myhostname 3. NET TYPE: OFF 3. NET TYPE: OFF 4. STATIC IP SETUP 4. STATIC IP SETUP 5. PPPOE ID SETUP 5. PPPOE ID SETUP 6. DNS/DDNS SETUP 6. DNS/DDNS SETUP 7. SERVER PORT SETUP 7. SERVER PORT SETUP MAC ADDR: xx.xx.xx.xx.xx.xx MAC ADDR: xx.xx.xx.xx.xx.
PAGE 44
6. DNS/DDNS SETUP DNS/DDNS SETUP DNS/DDNS SETUP 1. D.N.S 1: 000.000.000.000 1. D.N.S 1: 000.000.000.000 2. D.N.S 2: 000.000.000.000 2. D.N.S 2: 000.000.000.000 3. SERVER : DHS 3. SERVER : DTDNS 4. DOMAIN: [ x 20 space] 4. DOMAIN: [ 4irc.com 5. LOGIN ID:[ x 20 space] 5. LOGIN ID:[ your DTNS long in name 6. 6. :[ x 20 space] ] :[ 7. PASSWORD: [ x 20 space] 7. PASSWORD: [your DTNS long in password 8. CLEAR DDNS SETUP 8.
PAGE 45
6. HDD FORMAT ADVANCED SETUP PAGE 1. ALARM SETUP 2. MOTION SETUP 3. RECORD Press direction buttons up/down to HDD FORMAT items position. Press ENTER to format all HDD. SETUP 4. PASSWORD SETUP 5. NETWORK Caution: User can format HDD only when SETUP all HDD stop record or playback. 6. HDD FORMAT 7. FACTORY DEFAULT 8. SOFTWARE UPDATE HDD FORMAT CAUTION!! : ** HDD FORMAT CAUTION!!** ALL DATA IN THE HDD WILL BE Press ENTER button to format hard disk. DESTROYED!! PRESS [ENTER] TO FORMAT.
PAGE 46
7. FACTORY DEFAULT ADVANCED SETUP PAGE 1. ALARM SETUP 2. MOTION SETUP 3. RECORD Press direction buttons up/down to FACTORY DEFAULT items position. SETUP Press ENTER to restore. 4. PASSWORD SETUP 5. NETWORK SETUP 6. HDD FORMAT 7. FACTORY DEFAULT 8. SOFTWARE UPDATE ** CAUTION!! ** Press ENTER button to restore. ALL SETUP VALUE WILL BE CLEAR, AND RESTORE FACTORY DEFAULT!! PRESS [ENTER] TO RESTORE. Press ESC button to cancel. PRESS [ESC] TO CANCEL. 8. SOFTWARE UPDATE ADVANCED SETUP PAGE 1.
PAGE 47
USB Data Read and Networking 1. Windows 2000 / XP, select small character display. 2. Resolution 1024 x 768. 3. RAM up to 128 MB, system up to PIII-800. 4. Double click SETUP.EXE of CD, and then start to install. 5. User can go to company server to download AP software. 6. Browse install path and then click Next.
PAGE 48
7. Advice resolution 1024 x 768. According computer equipment, please choose suitable resolution 8. Select Start Menu Folder, and then click Next.
PAGE 49
9. Click create a desktop icon or not, select DVR type, and then click Next. 4 CH and 16 CH DVR Net viewer is suitable. Only some split screen can not display. 10. Click INSTALL to start install.
PAGE 50
11. Click Launch NetViewer and click Finish to done.
PAGE 51
12. Click Setting. Name: Name the IP address position.(Each name and IP saves every different input) 1 ~ 16 full screen select. IP Addr: Input DVR IP address. Full / Quad / 9 split / 16 split AVI codec: Different computer equipment; different AVI format. 6 split / 8 split / 10 split / 13 split Microsoft Windows Media video 9 is better. Or Cinepak Codec by Radius(Slow transmission, better quality) / Microsoft Video 1(Fast transmission, bad quality). Video: Fullsize, Halfsize: screen size choose.
PAGE 52
Click DDNS Host Name: Type DVR DDNS host name: Myhostname.4irc.com CMD Port: command port 21 or 7000 ~ 9999. It is same as DVR network video port setup. Which is same DVR MENU ADVANCED SETUP NETWORK SETUP DVR NAME: DNS/DDNS SETUP TCP-IP SETUP PAGE 1. SPEED:>512K 2. DVR NAME:[Myhostname 3. NET TYPE: OFF 4. STATIC IP SETUP 5. PPPOE ID SETUP 6. DNS/DDNS SETUP 7. SERVER PORT SETUP MAC ADDR: xx.xx.xx.xx.xx.xx 9. D.N.S 1: 000.000.000.000 ] 10. D.N.S 2: 000.000.000.000 11. SERVER : DTDNS 12.
PAGE 53
13. Click Login, depends on limits of authority. (ID / password is same as DVR) PASV mode: Sometime, if IP address under router or IP sharing, please click PASSIVE mode on if login OK but no image display on FTP mode. Originally is FTP active mode. Factory ID is user login. Input admin if you are an administer. Must input on little character. Factory: Password, admin : 44444, user : 11111. Password displays when log in, user just needs to input ID. User log in, no PlayBack function authority.
PAGE 54
14. Click Connect, after about 2 ~ 3 seconds to start connect LAN or WAN. Click Disconnect to stop. If the NETWORK is connecting success, the blue light would keep glisten Else, blue is always on light or not display, the connecting is failed. Click live / PlayBack / BackPlay mode. Live: DVR live watching. PlayBack: Change to playback mode. After 2 ~3 seconds to change.
PAGE 55
PLAY: Click RUN around 2 ~ 30 seconds to start play first record. If over 30 seconds, cannot find any file or network disconnect, Time out message popup. Please try again play or connect again. Click STOP to end playback. TIME LIST: Click RUN, time lists popup. On the item, double click date and time to start play, around 2 ~ 30 to start play first record. If over 30 seconds, cannot find any file or network disconnect, Time out message popup. Please try again play or connect again.
PAGE 56
-Master HDD Event Lists: -Slave HDD Event Lists: Click RUN, time lists popup. On the item, double click date and time to start play, around 2 ~ 30 to start play first record. If over 30 seconds, cannot find any file or network disconnect, Time out message popup. Please try again play or connect again. Click STOP to end playback.
PAGE 57
15. BackupPlay: - Click Open to choose file path.
PAGE 58
Click Play to start backup data play. Click Stop to end. Click Pause to temporary stop playback. Click Resume to restart. Choose camera, click mouse right button. Camera 1 ~ 4 switches or reset all. Click Save “CamNo xx image . / save image all to save current image. Save path is C:\DVR.
PAGE 59
4. AVI transfer: Click BackupPlay AVI : On live or playback mode, save files to .DVR file. And then OPEN file, press play to start playback. Press AVI button to start record AVI file. Press again to stop. Only 2 cameras selectable.
PAGE 60
Net Viewer P / T / Z Dome control mode For the setting details please refer to the remark on page 64 / 65 of the P/T/Z dome mode. Click the left button of mouse to choose the PTZ dome channel, and then press PTZ icon. PTZ Control function: Click the left button of mouse on direction arrowhead, on each click, the PTZ dome will move 16 +/- 4 degree. The Numeral presents for camera channel not PTZ ID.
PAGE 61
Record Time Table: 80GB HD Record Quality: Low. KB Range: Lowest: 13, Highest: 20. Average: 17. REC FPS 120 60 30 15 10 REC Hour 11 22 45 91 137 REC FPS 5 3 2 1 1/2 REC Hour 274 456 685 1370 2741 REC FPS 1/3 1/5 1/10 1/15 1/30 REC Hour 4112 6853 13706 20565 41140 Record Quality: Normal. KB Range: Lowest: 14, Highest: 25. Average: 20.
PAGE 62
VGA Description (Optional) Accessories: 1. 20 PIN Male to Female D-SUB pin cable X 1 2. VGA PCB bracket X1 3. Screws X4 1. VGA board introduction. VGA connector Socket 2. Resolution switcher table Pin 4 Resolution Pin 1 Pin 2 Pin 3 640X480 60HZ ON ON ON 800X600 60HZ ON ON OFF 1024X768 60HZ ON OFF ON 640X480 75HZ ON OFF OFF 800X600 75HZ OFF ON ON 1024X768 75HZ OFF ON OFF Resolution and switcher description. Step. 1 DVR Power on. NTSC / PAL auto detects. Step.
PAGE 63
Additional Hard Disk x 2 can be installed on DVR base. Both are 2-iron slices immobile type. 2 Iron slices are in the accessories box, please tell supplier if slices are not exist 2-iron slices immobile type: Slices immobile type: 4 screws hole on each slice. 2 for DVR base fixed. Another 2 for hard disk fixed. Hard disk install.: Locking hard disk screws, then locking DVR base screws to fixed on.
PAGE 64
P / T / Z Dome mode. 6. ADVNACED SETUP PAGE P.T.Z SETUP ADVANCED SETUP PAGE 1. ALARM SETUP 2. MOTION SETUP 3. RECORD SETUP PTZ SETUP PAGE CHANNEL NUMBER 1. ID 2. PROTOCOL 4. PASSWORD SETUP 5. NETWORK SETUP 6. P.T.Z SETUP 3. BAUDRATE 4. AUTO TOUR 5. LINE SCAN 7. HDD FORMAT 6. AUTO FOCUS 8. FACTORY DEFAULT 7. AUTO IRIS 9. SOFTWARE UPDATE PTZ SETUP PAGE CHANNEL NUMBER: CH01 ~ CH16 1. ID: 01 ~ 16 2. PROTOCOL: PELCO-P / PELCO-D / LILIN / ABC / ELITAR / DENTEC-D / DENTEC-P / OFF 3.
PAGE 65
Front Panel Button Comparison: W.M.: Press W.M button To P / T / Z mode PLAY / REC = IRIS off / IRIS open = FOCUS near / FOCUS far BACKUP / T-SRH = ZOOM IN / ZOOM OUT MENU = P / T / Z Dome Menu FRE. : To Preset mode. PRESET: 000 glisten on left-up corner. Moves P / T / Z dome to the position user wants. When “PRESET: glistening”, press number button. EX: 1 ~ 9. 10 = 1 + 10, 11 = 1 + 1, 12 = 1 + 2, 21 = 2 + 1, 132 = 1 + 3 + 2. ZOOM : After press ZOOM button to save the presets. INFO : Press FRE.
PAGE 66
IE Networking Software 1. This web is for preliminary IE browser. 2. User can download the network viewer from this web page or view the DVR video image in the future. 3. The AP software is already saved to DVR system IC. User needs to do is: a.) Go to Advanced Setup Network Setup Sets LAN or WAN IP address of DVR. b.) Open IE browser, and then into your IP on the IE address bar. c.
PAGE 67
Recording condition A: Solution 1 for residual image 16 channel: channels are divided into 4 groups as: (1、5、9、13) ( 2、6、10、14) (3、7、11、15) (4、8、12、16) Recording with one input from each group B: Solution 2 for playback image pasting Record Chanel \ Record Rate 30fps or less 1 1 2 2 3 4 4 4 5 7 Channel for 6 7 Video input 7 7 8 8 9 11 10 11 11 11 12 13 13 13 14 14 15 16 16 16 60fps Remark A: 1.