- Max user guide Transceiver

EXAMPLE 1

Numeric Entry

EXAMPLE 2

Numeric Entry

Several menu items require a number or value to be

entered. Numeric entry is performed with A B C D

and  keys. The A B C D keys each select and

add 1 to a specific digit as follows:

A – selects and adds 1 to the 4

digit from the right

B – selects and adds 1 to the 3

digit from the right

C – selects and adds 1 to the 2

digit from the right

D – selects and adds 1 to the rightm ost digit

Once a digit has been selected, use the  keys to

adjust the number. Press and hold  for faster

entry.

Numbers entered in this fashion are saved when the

~/MENU key is pressed and will remain saved even

after power is turned off. If the unit is powered off

while a numeric entry screen is displayed, the

displayed number will not be saved.

L The L key is not used for numeric entry. It is

used for Lag Time M easurement and is only

available in certain Delay modes. See the section

on Lag Time Measurement, Page 44, for more

information.

ë To quickly get to the lowest setting press and

release the A key once (selects the highes t digit)

then press and hold the  key.