Product manual

ManualsBrandsMaxStream ManualsComputer equipmentXStream-Pkg

XStream-PKG-E™ Ethernet RF Modem – Product Manual v4.2A

24XStream-PKG-E (2.4 GHz) Approved Antenna List

Table 4. XStream-PKG-E 2.4 GHz Approved Antennas with Separation Distances compliant with FCC Exposure Requirements

Manufacturer

2.4 GHz

Part Number

Type Gain Application

Minimum Separation

Distance

* * Yagi 6 dBi Fixed ** 2m

* * Yagi 8.8 dBi Fixed ** 2m

* * Yagi 9 dBi Fixed ** 2m

* * Yagi 10 dBi Fixed ** 2m

* * Yagi 11 dBi Fixed ** 2m

* * Yagi 12 dBi Fixed ** 2m

* * Yagi 12.5 dBi Fixed ** 2m

* * Yagi 13.5 dBi Fixed ** 2m

* * Yagi 15 dBi Fixed ** 2m

* * Omni Direct. 2.1 dBi Fixed/Mobile ** 20 cm

* * Omni Direct. 3 dBi Fixed/Mobile ** 20 cm

* * Omni Direct. 5 dBi Fixed/Mobile ** 20 cm

* * Omni Direct. 7.2 dBi Fixed ** 2m

* * Omni Direct. 8 dBi Fixed ** 2m

* * Omni Direct. 9.5 dBi Fixed ** 2m

* * Omni Direct. 10 dBi Fixed ** 2m

* * Omni Direct. 12 dBi Fixed ** 2m

* * Omni Direct. 15 dBi Fixed ** 2m

MaxStream A24-P8 Panel 8.5 dBi Fixed ** 2m

MaxStream A24-P13 Panel 13 dBi Fixed ** 2m

* * Panel 14 dBi Fixed ** 2m

* * Panel 15 dBi Fixed ** 2m

* * Panel 16 dBi Fixed ** 2m

MaxStream A24-P19 Panel 19 dBi Fixed ** 2m

MaxStream A24-HABMM-P6I Dipole 2.1 dBi Fixed/Mobile ** 20 cm

MaxStream A24-HBMM-P6I Dipole 2.1 dBi Fixed/Mobile ** 20 cm

MaxStream A24-HABSM Dipole 2.1 dBi Fixed/Mobile ** 20 cm

MaxStream A24-QABMM-P6I Monopole 1.9 dBi Fixed/Mobile ** 20 cm

* A24-Q1 Monopole 1.9 dBi Fixed/Mobile ** 20 cm

* * Monopole 1.9 dBi Fixed/Mobile ** 20 cm

* FCC-approved antennas not inventoried by MaxStream – Contact MaxStream (801-765-9885) for

information.

** Can be approved for portable applications if integrator gains approval through SAR testing

RF Exposure

WARNING: This equipment is approved only for mobile and base station transmitting devices, separation distances of (i)

20 centimeters or more for antennas with gains < 6 dBi or (ii) 2 meters or more for antennas with gains ≥ 6

dBi should be maintained between the antenna of this device and nearby persons during operation. To ensure

compliance, operation at distances closer than this is not recommended.

The preceding statement must be included as a CAUTION statement in manuals for OEM products to alert users on

CC RF Exposure compliance. F

In order to fulfill the FCC Certification requirements, the OEM must comply with FCC regulations:

1. The system integrator must ensure that the text on the sample label is placed on the outside of the final product

[Figure 15].

2. The 24XStream (2.4 GHz) OEM RF Module may be used only with Approved Antennas that have been tested with this

module. [Table 3]