Product manual

ManualsBrandsMaxStream ManualsComputer equipmentXStream-Pkg

XStream-PKG-E™ Ethernet RF Modem – Product Manual v4.2A

9XStream-PKG-E (900 MHz) Approved Antenna List

Table 3. XStream-PKG-E 900 MHz Approved Antennas with Separation Distances compliant with FCC Exposure Requirements

Manufacturer

900 MHz

Part Number

Type Gain Application

Minimum

Separation Distance

* * Yagi 6.2 dBi Fixed/Mobile ** 20 cm

* * Yagi 7.2 dBi Fixed/Mobile ** 20 cm

MaxStream A09-Y8 Yagi 8.2 dBi Fixed/Mobile ** 20 cm

* * Yagi 9.2 dBi Fixed/Mobile ** 20 cm

* * Yagi 10.2 dBi Fixed/Mobile ** 20 cm

MaxStream A09-Y11 Yagi 11.2 dBi Fixed/Mobile ** 20 cm

MaxStream A09-F2 Omni Direct. 2.2 dBi Fixed ** 20 cm

MaxStream A09-F5 Omni Direct. 5.2 dBi Fixed ** 20 cm

MaxStream A09-F8 Omni Direct. 8.2 dBi Fixed ** 20 cm

* * Omni Direct. 9.2 dBi Fixed ** 20 cm

* * Omni Direct. 7.2 dBi Fixed ** 20 cm

MaxStream A09-M7 Omni Direct. 7.2 dBi Fixed ** 20 cm

MaxStream A09-H 1/2 wave antenna 2.1 dBi Fixed/Mobile ** 20 cm

MaxStream A09-HBMM-P5I 1/2 wave antenna 2.1 dBi Fixed/Mobile ** 1cm

MaxStream A09-QBMM-P5I 1/4 wave antenna 1.9 dBi Fixed/Mobile ** 1cm

* *

1/4 wave integrated

wire antenna

1.9 dBi Fixed/Mobile ** 1cm

* FCC-approved antennas not inventoried by MaxStream – Contact MaxStream (801-765-9885) for

information.

** Can be approved for portable applications if integrator gains approval through SAR testing

MaxStream radio modems are pre-FCC approved for use in fixed base station and mobile applications. As long as the

antenna is mounted at least 20 cm (8 in) from nearby persons, the application is considered a mobile application. If the

antenna will be mounted closer than 20 cm to nearby persons, then the application is considered “portable” and requires an

additional test performed on the final product. This test is called the Specific Absorption Rate (SAR) testing and measures

the emissions from the radio modem and how they affect the person.

RF Exposure

WARNING: This equipment is approved only for mobile and base station transmitting devices, separation distances of (i)

20 centimeters or more for antennas with gains < 6 dBi or (ii) 2 meters or more for antennas with gains ≥ 6

dBi should be maintained between the antenna of this device and nearby persons during operation. To ensure

compliance, operation at distances closer than this is not recommended.

The preceding statement must be included as a CAUTION statement in manuals for OEM products to alert users on

FCC RF Exposure compliance.

In order to fulfill the FCC Certification requirements, the OEM must comply with FCC regulations:

1. The system integrator must ensure that the text on the sample label is placed on the outside of the final product

[Figure 14].

2. The 9XStream-PKG-E Ethernet RF Modem (900 MHz) may be used only with Approved Antennas that have been

tested with this module. [Table 2]