Product manual

XStream-PKG-E™ Ethernet RF Modem – Product Manual v4.2A

Appendix A:

Agency Certifications

FCC Compliance

The MaxStream XStream-PKG-E Ethernet RF Modem has been tested and certified to comply with

Part 15 of the FCC Rules. In order to inherit MaxStream’s FCC Certification, compliance requires

the following be stated:

FCC ID: OUR9XSTREAM (for 900 MHz) or OUR-24XSTREAM (for 2.4 GHz)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference and (2) this device must accept

any interference received, including interference that may cause undesired operation.

OEM Labeling Requirements

Label Warning

WARNING The Original Equipment Manufacturer (OEM) must ensure that FCC labeling

requirements are met. This includes a clearly visible label on the outside of the

final product enclosure that displays the contents shown in the figure below.

Figure 14. Required FCC Label for OEM products containing 9XStream (900 MHz) OEM RF Module

Contains FCC ID: OUR9XSTREAM

The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

Figure 15. Required FCC Label for OEM products containing 24XStream (2.4 GHz) OEM RF Module

Contains FCC ID: OUR-24XSTREAM

The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference and (2) this

device must accept any interference received, including interference that may cause

undesired operation.