Product manual
9XTend‐PKG‐R™RS‐232/485RFModem–ProductManualv1.2.4
©2005MaxStream,Inc.ConfidentialandProprietary 48
FCC-Approved Antennas (900 MHz)
Fixed Base Station and Mobile Applications
MaxStream Modems are pre-FCC approved for use in fixed base station and mobile applications.
When the antenna is mounted at least 20 cm (8”) from nearby persons, the application is
considered a mobile application.
Portable Applications and SAR Testing
When the antenna is mounted closer than 20 cm to nearby persons, then the application is
considered “portable”
and requires an additional test be performed on the final product. This test
is ll and measures the emissions from the modem
an
RF x
(T t manuals.)
ca ed the Specific Absorption Rate (SAR) testing
d how they affect the person.
E posure
his statement must be included as a CAUTION statement in OEM produc
WARNING: This equipment is approved only for mobile and base station transmitting devices.
Antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 30 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
NOTE: The separa or
equal to 23 cm ca
To fulfill FCC Cer ents:
1. Integrator must ensure required text [Figure A-01] is clearly placed on the outside of the
tion distance indicated in the above is 30 cm, but any distance greater than
n be used (per MPE evaluation).
tification requirem
final product.
2. XTend Modem may be used only with Approved Antennas that have been tested with this
modem. [Refer to Tables A-01 – A-07]
1 Watt Transmit Power Output or Lower
TableA‐01. Half‐waveantennas(approvedwhenoperatingat1Wattpoweroutputorlower.)
Part Number Type Connector Gain Application
A09-HSM-7 -wave RPSMA 3.0 dBi Fixed / Mobile Straight half
A09-HASM-675 Articulated half-wave RPSMA 2.1 dBi Fixed / Mobile
A09-HABMM-P6I Articulated half-wave w/ 6” pigtail MMCX 2.1 dBi Fixed / Mobile
A09-HABMM-6-P6I Articulated half-wave w/ 6” pigtail MMCX 2.1 dBi Fixed / Mobile
A09-HBMM-P6I Straight half-wave w/ 6” pigtail MMCX 2.1 dBi Fixed / Mobile
A09-HRSM RPSMA 2.1 dBi Fixed Right angle half-wave
A09-HASM-7 Articulated half-wave RPSMA 2.1 dBi Fixed
A09-HG Glass mounted half-wave RPSMA 2.1 dBi Fixed
A09-HATM Articulated half-wave RPTNC 2.1 dBi Fixed
A09-H lf-wave dipole RPSMA 2.1 dBi Fixed Ha
TableA‐02. Yagiantennas(approvedwhenoperatingat1Wattpoweroutputorlower.)
Part Number Type Connector Gain Required Antenna Cable Loss Application
A09-Y6 2 Element Yagi RPN 6.1 dBi - 0.1 dB* Fixed / Mobile
A09-Y7 3 Element Yagi RPN 7.1 dBi - 1.1 dB* Fixed / Mobile
A09-Y8 4 Element Yagi RPN 8.1 dBi - 2.1 dB* Fixed / Mobile
A09-Y6TM 2 Element Yagi RPTNC 6.1 dBi - 0.1 dB* Fixed / Mobile
A09-Y7TM 3 Element Yagi RPTNC 7.1 dBi - 1.1 dB* Fixed / Mobile
A09-Y8TM 4 Element Yagi RPTNC 8.1 dBi - 2.1 dB* Fixed / Mobile
*FCCregulationsstipulatea36dBmEIRPpowerrequirement.Usersimplementingantennagaingreaterthan6.0dBmustcompensateforthe
addedgainwithcableloss.Whenoperatingat1Wpoweroutput,thesum(indB)ofcablelossandantennagainshallnotexceed6.0dB.