Use and Care Manual

meters) and has a 120 degree angle for the sensor. The sensor

is more sensitive to movement acroos the detection area than

movement directly towards or away from the sensor.

120

Clean off the positive side of the battery terminals in the

battery compartment cover and pull the negative side springs

out a little so they exert more pressure on the batteries.

If your LED Outdoor Wall Sconce does not turn on after

battery installation:

or drill.

The selected location should not be near light sources such as

street or porch lighting as these may stop the LED Outdoor Wall

Sconce from turning on. The LED Outdoor Wall Sconce should

also be installed away from heaters, air conditioners, barbecues,

vents and large reﬂective surfaces such as swimming pools and

jacuzzis, and white walls.

in low light.