If your LED Outdoor Wall Sconce does not turn on after battery installation: in low light. Clean off the positive side of the battery terminals in the battery compartment cover and pull the negative side springs out a little so they exert more pressure on the batteries. The selected location should not be near light sources such as street or porch lighting as these may stop the LED Outdoor Wall Sconce from turning on.
LIGHT LEVEL ADJUSTMENT The LUX dial controls the natural light level that triggers the Motion-Activated Wall Sconce and prevents it from operating in bright light. and needs to be turned to AUTO to activate. moving cars can trigger the motion sensor.
Batteries: 120 23 Fairfax Station, VA 22039 7 8 5
, 46719, 49719 quand l’interrepter est sur “auto”, conditions d’éclairage ou de mouvement. Ceci est un test d’acitvation pour montrer que l’énergie coule des batteries la lumiére. II dure pour 30 seconds. Aprés le test, l’applique va fonctionner normalement.
7 7
7 W )DLUID[ 6WDWLRQ 9$