Product Manual

TROUBLESHOOTING
MAXSA In
n
ovation
s
8412 Cathedral Forest Drive
Fairfax Station, VA 22039
MADE IN CHINA
v15-6
©2015 MAXSA Innovations, LLC
Light does not turn on
when there is movement
in the detecton area.
Light turns on for no
apparent reason (false
trigger).
Light turns on during
daylight hours.
1. Batteries are old.
2. Nearby lighting is too bright.
3. The light is facing the wrong direction.
1. Heat sources such as air conditioners,
vents, barbecues, other outside lighting, or
moving cars are false triggering the
motion sensor.
2. Pets or other animals are false triggering
the motion sensor.
3. Reflections from swimming pools,
jacuzzis, white walls, or other large
reflective surfaces are false triggering the
motion sensor.
1. A roof, wall, tree, or other object is casting
a shadow on the sensor.
1. Replace the batteries.
2. Install the
LED Outdoor Wall Sconce
in a
different location or facing a different
direction, away from other lighting.
3. Install the
LED Outdoor Wall Sconce
facing the desired detection area.
1. Install the
LED Outdoor Wall Sconce
away
from the sources of interference.
2. Mounting the
LED Outdoor Wall Sconce
higher or facing the light in a different
direction may help.
3. Install the
LED Outdoor Wall Sconce
away
from the sources of reflections.
1. Install the
LED Outdoor Wall Sconce
in a
non-shaded location or facing a direction
away from sources of shadows.
NOITULOS ELBISSOPESUAC ELBISSOPMELBORP
SPECIFICATIONS
Batteries Required: Four (4) 1.5V C batteries (not
included)
LEDs: 2 x 0.5 Watt Surface Mount LEDs
Brightness: 85 Lumens (43319 is 70 lumens)
Voltage: 6V DC
Light Duration: approximately 2 0 seconds
Detection Angle: 90˚ (cone)
Maximum Detection Distance: 23 feet (7 meters)
page 3
1 YEAR WARRANTY
Tel: [phone]
661
www.maxsainnovations.com
[e-mail]
1 YEAR LIMITED WARRANTY: MAXSA Innovations, LLC warrants to the original
consumer/purchaser that this product shall be free of defects in material and
workmanship under normal use and circumstances for a period of one (1) year from
the date of original purchase for use. When the original consumer/purchaser returns
the product pre-paid (consumer pays return shipping) to MAXSA Innovations, LLC,
8412 Cathedral Forest Drive, Fairfax Station, VA 22039; USA within the warranty
period, and if the product is defective, MAXSA Innovations, LLC will at its option repair
or replace such. This warranty shall constitute the sole liability of MAXSA
Innovations, LLC concerning the product. MAXSA Innovations, LLC expressly
disclaims all other warranties INCLUDING, WITHOUT LIMITATION, THE
WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. NO PERSON, FIRM, OR COPORATION IS AUTHORIZED TO ASSUME
FOR MAXSA Innovations, LLC ANY OTHER LIABILITY IN CONNECTION WITH THE
SALE AND USE OF THE PRODUCT. MAXSA Innovations, LLC and agents and
distributors will bear no liability whatsoever for incidental or consequential damages or
charges of any kind. Some states do not allow the reclusion or limitation of incidental
or consequential damages, so the above disclaimer regarding incidental or
consequential damages may not apply to you. This warranty is void if the product
has been damaged or tampered with or if the product or any such parts have been
opened. In all cases of damage during shipment, a claim must be filed with the
shipping carrier and not with MAXSA Innovations, LLC. This warranty gives you specific
legal rights; you may also have other rights which vary from state to state.