Installation Manual

2
Carefully remove and identify all the parts from their protective packaging and lay them out in front
of you.
INCLUDED PARTS:
Mounting bracket
Brightness
control switch
On/Off Switch
Photosensor
10 foot power cable
Solar panel
Pole Mounting
Straps and
Bracket
4 screws and 4 anchors for
mounting the solar panel
Solar panel angle pivot
Solar panel
mounting bracket
Main battery unit
HOW TO INSTALL YOUR SOLAR FLOOD LIGHT
MOUNTING TO A WALL, ROOF OR SIGN
1. Remove the mounting bracket from your Solar Powered Flood Light by taking out the
two screws on the left and right sides of the main body
2. Take the other two screws supplied with this product and install the mounting bracket
onto a solid surface. Put the mounting bracket and the main body back together by
using the two screws taken out in Step 1.