Instruction Manual

Gamatronic Electronic Industries Ltd. User Guide
POWER + SA Shutdown
This section describes the shutdown procedures for the UPS if you want
to shut it down for a period of time during which the load devices will
not be operating.
Begin the process from the UPS ON, NORMAL MODE screen.
1. It is advisable to turn of all equipment connected to the POWER + SA.
2. Press the ON/OFF button twice.
The ALARM LED lights up for a few seconds,
then the screen reads “UPS OFF, NO OUTPUT”.
The POWER + SA shutdown is now complete.
+
35
POWER SA User Guide (UL), Release 1.7