Instruction Manual

User Guide Gamatronic Electronic Industries Ltd.
5. DAILY OPERATION
POWER + SA Start-up
This section explains how to start-up the POWER + SA after a shutdown.
You are beginning the process from the UPS OFF NO OUTPUT screen.
1. Press the ON/OFF button twice.
The BYPASS and ALARM LEDs light up for about 40 seconds.
2. After a short time the screen reads
“UPS ON, NORMAL MODE”.
The AC INPUT and NORMAL LEDs are lit.
3. You can now turn on the computers or other equipment connected to the UPS.
POWER + SA start-up is now complete.
34 +
POWER SA User Guide (UL), Release 1.7